EIGRP over MPLS

Comments

• Options

  QHalo Member Posts: 1,488

  October 2010

  MPLS VPN support for EIGRP between Provider Edge (PE) and Customer Edge (CE) - Cisco Systems

  http://vwilmo.wordpress.com
  
  

  0 · Share on FacebookShare on Twitter
• Options

  Forsaken_GA Member Posts: 4,024

  October 2010

  quite possible. The biggest 'trick' to remember is to specify the AS number under the address family ipv4 vrf.

  0 · Share on FacebookShare on Twitter
• Options

  APA Member Posts: 959

  October 2010

  also remember....
  
  redistributing BGP vrf routes into the EIGRP vrf instance requires the use of 'default-metric' or 'metric' command used with the 'redistribute bgp' line... other wise redistribution will not work.
  
  and... the 'autonomous-system' number that Forsaken mentioned is the process number you used when redistributing relevant eigrp instance into the relevant BGP vrf instance....not the global eigrp process number that you configured.

  ---

  CCNA | CCNA:Security | CCNP | CCIP
  JNCIA:JUNOS | JNCIA:EX | JNCIS:ENT | JNCIS:SEC
  JNCIS:SP | JNCIP:SP

  0 · Share on FacebookShare on Twitter