Need advice on this

hellopaul2000mail

Hi guys and gals, been offered some kit but not sure wat its worth and if it will be any use for my ccna and ccnp exams. been offered it for £150

Ideal for CCNA Lab: 3 x Cisco 2504 -- 1 x Cisco 1601R -- 1 x Cisco 1603R (no p.s.u)

3 x DCE x DTE leads - 2 x console leads - 1 x 802.5 LanView

some documentation

Show Ver:

CISCO 2504

ECIFIC RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1996 by cisco Systems, Inc.

Compiled Wed 10-Sep-97 13:06 by phester

Image text-base: 0x01010000, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE(fc1)

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.

Processor board ID 07120162, with hardware revision 00000000

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Basic Rate ISDN software, Version 1.0.

1 Token Ring/IEEE 802.5 interface.

2 Serial network interfaces.

1 ISDN Basic Rate interface.

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

CISCO 2504

ECIFIC RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1996 by cisco Systems, Inc.

Compiled Wed 10-Sep-97 13:06 by phester

Image text-base: 0x01010000, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE(fc1)

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.

Processor board ID 06906336, with hardware revision 00000000

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Basic Rate ISDN software, Version 1.0.

1 Token Ring/IEEE 802.5 interface.

2 Serial network interfaces.

1 ISDN Basic Rate interface.

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash partition 1 (Read/Write)

8192K bytes of processor board System flash partition 2 (Read/Write)

CISCO 2504

ECIFIC RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1996 by cisco Systems, Inc.

Compiled Wed 10-Sep-97 13:06 by phester

Image text-base: 0x01010000, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE(fc1)

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.

Processor board ID 08871819, with hardware revision 00000000

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Basic Rate ISDN software, Version 1.0.

1 Token Ring/IEEE 802.5 interface.

2 Serial network interfaces.

1 ISDN Basic Rate interface.

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash partition 1 (Read/Write)

8192K bytes of processor board System flash partition 2 (Read/Write)

CISCO 1601R

Cisco Internetwork Operating System Softwarethe Government iserver (255.255.255

%LINK-5-

IOS (tm) 1600 Software (C1600-Y-M), Version 12.1(1)T, RELEASE SOFTWARE (fc1)er name, or unable to find computer address

(c) of the Commercial Co

Image text-base: 0x02005000, data-base: 0x0258EAC8

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)

ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T, RELEASE SOFTWARE (fc1)

cisco 1601 (68360) processor (revision C) with 7680K/512K bytes of memory.

Processor board ID 26592862, with hardware revision 00000005

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial(sync/async) network interface(s)

1 ISDN Basic Rate interface(s)

System/IO memory with parity disabled

8192K bytes of DRAM onboard

System running from RAM

7K bytes of non-volatile configuration memory.

4096K bytes of processor board PCMCIA flash (Read/Write)

Cisco 1603R

Cisco Internetwork Operating System Software

IOS (tm) 1600 Software (C1600-K8OSY-L), Version 12.2(6b), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Fri 18-Jan-02 02:08 by pwade

Image text-base: 0x0200544C, data-base: 0x02933024

cisco 1603 (68360) processor (revision C) with 15872K/512K bytes of memory.

Processor board ID 15754254, with hardware revision 00000002

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

1 Ethernet/IEEE 802.3 interface(s)

1 ISDN Basic Rate interface(s)

System/IO memory with parity disabled

8192K bytes of DRAM onboard 8192K bytes of DRAM on SIMM

System running from RAM

7K bytes of non-volatile configuration memory.

16384K bytes of processor board PCMCIA flash (Read/Write)

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

EdTheLad

It's a fair enough price,maybe it would cost more buying the kit seperately because when you add shipping,cable, dram and flash it all adds up.You will have to buy transcievers for this lab and also probably a couple of WICs for the 1600s.
Your lacking a switch but for general config and learning the cisco ios these are ok.For CCNP you probbably should add a couple of 2600s.

hellopaul2000mail

ok guys does not look like a good idea. also been offerd this but its 420 buck, is it worth buying

A complete CCNA / CCNP lab

*** Everything you see in the photo above and much more ***

*** Cisco 1720 Modular Fast Ethernet Router ***

*** 3 Cisco 2500 Routers including Frame-Relay ***

*** Complete Fast Ethernet / Ethernet switched LAN ***

*** Complete MAU centred token ring LAN ***

Inventory:

Routers

Cisco 1720 Modular Fast Ethernet Router 32D/8F IP/ADSL/FW/IDS PLUS IPSEC 3DES 12.2
Cisco 2503 Ethernet Router 16D/16F Enterprise Plus IPSec 12.2
Cisco 2521 Frame Relay Router 16D/16F Enterprise Plus IPSec 12.2
Cisco 2504 Dual Serial / Token Ring Router 16D/16F Enterprise Plus IPSec 12.2
Switches / Hubs

Cisco 1912 Switch running Enterprise IOS
Token Ring MAU/Hub
Accessories

4 x serial DB60-DB60 crossover cables
8 x cat 5E straight-through cables
5 x RJ45 / DB9 console cables
1 x ethernet transceiver for 2503
1 x token ring UTP / STP converter for 2504
2 x 10/100 Fast Ethernet PCI network cards
2 x IBM 4/16 token ring network cards (new and boxed)
Additional

Thoroughly tested before shipping
Power cables for all devices
Three cd-roms for CCNA CCNP CCIE CCSP CCDP etc
Alternative or additional items available (ADSL, extra switches, etc)
Do not hesitate to get in touch if you have any questions.

EdTheLad

Look mate, it all depends on what you want to do.I wouldnt pay that price for that equipment.Dont just look on ebay see a lab and ask here! Search on ebay for the equivalent equip and check the prices.
You dont need any of that token ring stuff as its not on the exam anymore,theres no point buying equipment you dont need unless you really wanna play with token ring?
The question is how much are you willing to spend,what protocols you want to practice with and whats your long term goal.If you just want CCNA possibly CCNP buy afew 2500s first to practice with the routing protocols then as you get more familiar with the equipment you can then add some extra equipment like a switch,isdn sim some more powerful routers.Remember if you buy from the US you have to add the VAT onto the price which takes away the advantage of the cheap prices.

hellopaul2000mail

fair enough mate, i just dont know cisco kit really well at the moment. so much stuff out their. i really need to do ospf stuff so i will need 3 routers. But what i need is enough kit to take me through to my ccnp.

rossonieri#1

hellopaul2000mail wrote:

ok guys does not look like a good idea. also been offerd this but its 420 buck, is it worth buying

A complete CCNA / CCNP lab

*** Everything you see in the photo above and much more ***

*** Cisco 1720 Modular Fast Ethernet Router ***

*** 3 Cisco 2500 Routers including Frame-Relay ***

*** Complete Fast Ethernet / Ethernet switched LAN ***

*** Complete MAU centred token ring LAN ***

Inventory:

Routers

Cisco 1720 Modular Fast Ethernet Router 32D/8F IP/ADSL/FW/IDS PLUS IPSEC 3DES 12.2
Cisco 2503 Ethernet Router 16D/16F Enterprise Plus IPSec 12.2
Cisco 2521 Frame Relay Router 16D/16F Enterprise Plus IPSec 12.2
Cisco 2504 Dual Serial / Token Ring Router 16D/16F Enterprise Plus IPSec 12.2
Switches / Hubs

Cisco 1912 Switch running Enterprise IOS
Token Ring MAU/Hub
Accessories

4 x serial DB60-DB60 crossover cables
8 x cat 5E straight-through cables
5 x RJ45 / DB9 console cables
1 x ethernet transceiver for 2503
1 x token ring UTP / STP converter for 2504
2 x 10/100 Fast Ethernet PCI network cards
2 x IBM 4/16 token ring network cards (new and boxed)
Additional

Thoroughly tested before shipping
Power cables for all devices
Three cd-roms for CCNA CCNP CCIE CCSP CCDP etc
Alternative or additional items available (ADSL, extra switches, etc)
Do not hesitate to get in touch if you have any questions.

wow... i think those should be enough