connecting two switches

shiminkieshiminkie Member Posts: 1 ■□□□□□□□□□
Question, I always thought that when you connect two switches together you have to set it up as a trunk. I noticed today that someone connected a switch to another and did not set it up as a trunk on the CLI. Is this possible or did I see wrong?

Comments

  • benjiga69benjiga69 Member Posts: 23 ■□□□□□□□□□
    This situation soley depends on what type of switch you use. By this I mean auto sensing(10/100) or not, for example. If you use a standard switch with an auto sensing switch it should work. But for example if you use a 100 speed switch with a 10 then trunking is required. If I am wrong someone correct me. Hope this helps.
    That which is easily obtained, is lightly esteemed!
  • darkuserdarkuser Member Posts: 620 ■■■□□□□□□□
    connect anything you want
    it's the topology and how you configure it that matters
    rm -rf /
  • johnnynodoughjohnnynodough Member Posts: 634
    when you connect two switches you setup a trunk only if you are implementing VLANs. They dont have to be directly connected either, they can be seperated by a WAN link.

    Has nothing to do with speed or auto sensing.
    Go Hawks - 7 and 2

    2 games againts San Fran coming up, oh yeah baby, why even play? just put then in the win category and call it good :p
  • benjiga69benjiga69 Member Posts: 23 ■□□□□□□□□□
    Thanks, I learned something new!
    That which is easily obtained, is lightly esteemed!
Sign In or Register to comment.