what is my issue 1841 tftp update?

See below I am running the tftpdnld command after I set the paramters
for connectivity. but it keep user aborting and not giving me a chance to say yes to continue and overwrite.

I have a flash that went bad so I purchased a new flash for this 1841 cisco router. So I am trying to load a ios on it? so do I have to format the flash first ?? and if so how do I do that? before I load IOS on it. Thanks

Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n: [n]:
TFTP download aborted - user request
rommon 31 > tftpdnld
IP_ADDRESS: 192.168.1.88
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.1.85
TFTP_SERVER: 192.168.1.85
TFTP_FILE: c1841-adventerprisek9-mz.124-24.T4.bin
TFTP_MACADDR: 00:14:f2:1a:a0:f2
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: Yes
FE_PORT: 0
FE_SPEED_MODE: Auto Detect
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n: [n]:
TFTP download aborted - user request
rommon 32 > set
PS1=rommon ! >
WARM_REBOOT=FALSE
RET_2_RTS=17:55:23 UTC Fri Apr 6 2007
BSI=0
RET_2_RCALTS=
RANDOM_NUM=301384106
IP_ADDRESS=192.168.1.88
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.1.85
TFTP_SERVER=192.168.1.85
TFTP_FILE=c1841-adventerprisek9-mz.124-24.T4.bin
?=38
rommon 33 >
rommon 33 >

Find more posts tagged with

Comments

mens

so you can't press 'y' when the prompt asks you to continue? weird I guess.

Easiest way to install an ios on a cf card is to throw the cf in your pc and just copy the .bin over.

itdaddy

yes excatly weird seee below it says aborted by user and I just run the tftpdnld commadn it says it is aborted by user I have never had this usually it just works? how can I put in my pc who has the compact flash insert that size???

rommon 15 > tftpdnld
IP_ADDRESS: 192.168.1.88
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.1.2
TFTP_SERVER: 192.168.1.85
TFTP_FILE: c1841-adventerprisek9-mz.124-24.T4.bin
TFTP_MACADDR: 00:14:f2:1a:a0:f2
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: Yes
FE_PORT: 0
FE_SPEED_MODE: Auto Detect
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n: [n]:
TFTP download aborted - user request
rommon 16 >

deth1k

You should hit yes and let it format the flash card before it will atempt to copy image across.

Akiii

what telnet sw are you using?

mens

itdaddy wrote: »

how can I put in my pc who has the compact flash insert that size???

Well, you need a card reader. I have one of those multi-card readers which includes a slot for CF. 5 bucks on Ebay

tiersten

You should always format flash cards in a router before using them. You usually can't put Monlib on once a card has been used as the initial sectors are used.

itdaddy

thanks guys yeah I have a card reader at home I just noticed that is big enough for this compact flash it looks like but I thought the cisco router just formats it on the fly before it copies it? oka will try it and then go for it thanks will let you know thanks

itdaddy

Akii

I am using Absolute telnet

itdaddy

my telnet software sucks...Absolulte telnet is great but I am sure it is some setting in it that needs to be set. it now lest me answer yes
because I used putty.exe instead of absolute telnet yes! tahnks

yep I used putty.exe and it works great just wanted to let you know
it was my telnet software that screwed me up

rommon 6 > set
PS1=rommon ! >
WARM_REBOOT=FALSE
?=0
RET_2_RTS=17:55:23 UTC Fri Apr 6 2007
BSI=0
RET_2_RCALTS=
RANDOM_NUM=301384106
IP_ADDRESS=192.168.1.107
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.1.2
TFTP_SERVER=192.168.1.85
TFTP_FILE=c1841-adventerprisek9-mz.124-24.T4.bin
rommon 7 > tftpdnld
IP_ADDRESS: 192.168.1.107
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.1.2
TFTP_SERVER: 192.168.1.85
TFTP_FILE: c1841-adventerprisek9-mz.124-24.T4.bin
TFTP_MACADDR: 00:14:f2:1a:a0:f2
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: Yes
FE_PORT: 0
FE_SPEED_MODE: Auto Detect
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n: [n]: y

Akiii

go get used to putty

pitviper

Or SecureCRT

tiersten

itdaddy wrote: »

I thought the cisco router just formats it on the fly before it copies it?

No. It won't format the card unless you tell it to. You should always format it using the same device as what the card is intended for.