Is Certificationkits.com good?

in CCNA & CCENT
I'm looking to build a CCNA lab and my budget is around $1000. I've been looking at certificationkits.com and they look like they have some good kits and reasonable prices but just wanted to see if anybody has bought anything from them and what you're experience was. I've seen this site appears to do a lot of business through e-bay and their reviews look promising, but I'm hoping someone can share their own personal experience here if they have dealt with this company.
I'm interested in getting one of their CCNA/starter CCNP labs and one of the racks they sell. I plan to expand this lab for CCNP and maybe get into VOIP or other areas, but right now I just need something to start with.
Thoughts?
Also, anyone have one of those racks they sell? the 20u rack is only $40 more than the 12u but I don't know which I would need. Considering I'm looking to expand eventually I'm leaning towards the 20u....but I don't know if that would be too big either. I think the brand is skeleton or something, but I can't tell from the pictures and they don't mention any brand name on the site.
Oops, had my ad block turned on....I thought they were advertisers here....so is that a good thing? Hopefully it's okay to discuss
I'm interested in getting one of their CCNA/starter CCNP labs and one of the racks they sell. I plan to expand this lab for CCNP and maybe get into VOIP or other areas, but right now I just need something to start with.
Thoughts?
Also, anyone have one of those racks they sell? the 20u rack is only $40 more than the 12u but I don't know which I would need. Considering I'm looking to expand eventually I'm leaning towards the 20u....but I don't know if that would be too big either. I think the brand is skeleton or something, but I can't tell from the pictures and they don't mention any brand name on the site.
Oops, had my ad block turned on....I thought they were advertisers here....so is that a good thing? Hopefully it's okay to discuss

Comments
-Peanut
-Mayor Cory Booker
I have a real hard time recommending a pre-built kit for $475 that only contains $200 worth of hardware and might not be good enough for even the CCNA.
For your budget, you can put together a GREAT CCNP lab and still have money left over.
Basically I want at least 3 routers and 3 switches and I'd like to be able to expand this into either a voice, security, and/or CCNP setup, (preferably all 3
Any advice is great....and any advice that can help me get more for my money is just flat out awesome
Even though I didnt buy from them because of the cost, Im not as down on them as some others here. They have return policy, they take the guesswork out of buying all the components, and they have all the extras for lab and studying. Ebay sellers are usually trying to recoop some cost, not always trying to run a business - though some are...you can tell from their names and their 'buy now' or high initial bid.
Short version, ebay is cheaper but you kind of need to know everything you need beforehand. Cert kits are more expensive but you dont have to know much to get everything you need for your lab and you get the extras.
Courses Required For Me To Graduate WGU in MS: IT Network Managment: MCT2, LZT2, MBT1, MDT2, MNT2
CU Done this term: 16 Total CU Done: 19
Currently working on: Nothing Graduation Goal: 5/2013
Network+ - 6May2011
2011/2012 Goals:
CCNA / CISSP
Books & Videos:
CBT Network+
As others have said you will learn a lot doing the resaerch.
I started off with some cheap 2500's. After I found out they were ok, but to learn all the cocepts new models would be needed I began to research. I learned quite a bit from reading the different threads on TE about different router models, switches, WIC's and cables. I also also glad to know the lab I built will be a good grounding for the CCNP.
I just totaled my lab up this week and it came to about 750, with 150 of that being shipping.
1 1600 (free but needed power cord)
3 2500'S
1 2511RJ 45
2 2600XM's
1 2600
1 3640
1 2900 Switch
4 2950's switches
WICs include several DSU\CSU and serials
NM include several nm-2e2w which were included with the 3640, purchased a NM-4T for frame relay.
Switches:
2 or 3 -2950 or 2960 (not really sure of the differences)
1 - 3550
Routers:
2611 or 2621 (again, not really sure of the differences)
1 - 3725 - supposedly good for voice track
1 - 2811 - supposedly good for both security and voice tracks
I put supposedly because I don't want someone else to read this and think I might know what I'm talking about
I think the switches I have chosen are probably good, but I'm less certain with the routers and have no clue what kinds of WICs to look into. I'm also looking into getting a Skeletek rack, should 20u be fine? The 28u isn't much more expensive...but I don't exactly have all the space in the world either...thoughs?
The rack itself is great. It wont tip over (kids pull on it). Metal is good quality, heavy. Plus like i said if you think you'll outgrow whatever you originally buy they are expandable. I got the 12U because I dont imagine needing more than 8 1U devices - and it's the same height as my desk.
On your switches, look into seeing if you want the 2950's with the gbics or gigabit ports for stacking.
2960 supports IPv6
A+, Network+, CCNA
I went ahead and started piecing together my home lab. Well, technically I don't think 2 routers can be considered a lab, but because I spent almost $200 on a nice Skeletek rack it's officially a lab to me
Picked up a 2611XM maxed out on memory with 12.4 IOS and also got a 2621XM with 2 serial WIC cards, (which I stuck one in the 2611 so I could connect them via serial). Don't have any switches yet so that's on my next list - probably a pair of 2950's for now, then maybe a couple 3550's later on for some layer 3 switching goodness.
I'm definitely glad I chose to piece my lab together rather than buy a kit. I'm learning a lot more than if I had just charged a large lump sum to my credit card. Even though I haven't bought much, I have a much better idea of exactly what I want moving forward.
One question about full time power costs...
If it's not too expensive I'd like to set this lab up so I can remote into it anytime. Let's say I were to get another router and perhaps 3 switches plus a 2501 to act as a terminal server. That's three 2600XM routers, 3 switches (probably two 2950s and a 3550), and one 2501 as my terminal server.
Any idea what that might cost to power each month 24/7?
I remembered seeing this on another forum recently. As always, your results may vary depending on your exact equipment and where you live.
I'm purchasing my lab as soon as I pass ICND1 (6/21/11).
Good luck, astro!