Cisco switch 2950 problem
blackened
Member Posts: 30 ■■□□□□□□□□
in CCNA & CCENT
hello everyone, this is my first post, I've been reading some cisco certification topics in this forum and had been great.
Anyway, I recently bought a cisco switch catalyst 2950 and I just got it two days ago, but unfortunately I haven't been able to put hands on the IOS yet.
For some reason keyboard doesn't respond when i do the connection with tera term, and hyperterminal (been switching between those two), I see the boot process, but after it ask about setting up the initial configuration it doesn't respond any keyboard I hit, either 'y' or 'n'
So anyway I've tested 3 console cables, and two different computers and i get the very same result in every scenario.
I really hope someone can give me a hint of whatever is going on, I have copied the boot proces (at least what it's shown), and leave it here, if that helps.
I'm pretty new to cisco stuff, any help would be really appreciated. Thanks in advance.
That's it, it just stops right there, and no keyboard respond.
Anyway, I recently bought a cisco switch catalyst 2950 and I just got it two days ago, but unfortunately I haven't been able to put hands on the IOS yet.
For some reason keyboard doesn't respond when i do the connection with tera term, and hyperterminal (been switching between those two), I see the boot process, but after it ask about setting up the initial configuration it doesn't respond any keyboard I hit, either 'y' or 'n'
So anyway I've tested 3 console cables, and two different computers and i get the very same result in every scenario.
I really hope someone can give me a hint of whatever is going on, I have copied the boot proces (at least what it's shown), and leave it here, if that helps.
I'm pretty new to cisco stuff, any help would be really appreciated. Thanks in advance.
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(6)EA2c, RELEASE SOFTWARE (fc1)
Compiled Thu 28-Feb-02 14:59 by antonino
WS-C2950-24 starting...
Base ethernet MAC Address: 00:0a:41:17:47:40
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 15 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 4168192
flashfs[0]: Bytes available: 3573248
flashfs[0]: flashfs fsck took 6 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading "flash:c2950-i6q4l2-mz.121-9.EA1.bin"...#########################################################################################################################################################################################################################################################################
File "flash:c2950-i6q4l2-mz.121-9.EA1.bin" uncompressed and installed, entry point: 0x80010000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 24-Apr-02 06:57 by antonino
Image text-base: 0x80010000, data-base: 0x804E8000
Initializing flashfs...
flashfs[1]: 15 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 7741440
flashfs[1]: Bytes used: 4168192
flashfs[1]: Bytes available: 3573248
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
Done initializing flashfs.
POST: System Board Test : Passed
POST: Ethernet Controller Test : Passed
ASIC Initialization Passed
POST: FRONT-END LOOPBACK TEST : Passed
cisco WS-C2950-24 (RC32300) processor (revision E0) with 20815K bytes of memory.
Processor board ID FHK0625Y220
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0A:41:17:47:40
Motherboard assembly number: 73-5781-10
Power supply part number: 34-0965-01
Motherboard serial number: FOC06250BMJ
Power supply serial number: DAB06244U1T
Model revision number: E0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FHK0625Y220
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
00:00:14: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:00:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 24-Apr-02 06:57 by antonino
That's it, it just stops right there, and no keyboard respond.
Comments
-
tomaifauchai
Member Posts: 301 ■■■□□□□□□□
Out of curiosity, have you disabled flow control (Xon, Xoff) on the terminal client ?
Applying Correct Terminal Emulator Settings for Console Connections [Asynchronous Connections] - Cisco Systems -
Chris_
Member Posts: 326
Also, have you tried changing the baud rate of you terminal? Start at 115 and work your way down; someone may have adjusted it for an Xmodem transfer.Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
blackened
Member Posts: 30 ■■□□□□□□□□
Out of curiosity, have you disabled flow control (Xon, Xoff) on the terminal client ?
Applying Correct Terminal Emulator Settings for Console Connections [Asynchronous Connections] - Cisco Systems
hi, thanks foy your replies guys, I forgot to mention the settings I've been using for the config, they are as follows:
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Like the settings from the link you sent tomaifauchai, am I doing sth wrong?Also, have you tried changing the baud rate of you terminal? Start at 115 and work your way down; someone may have adjusted it for an Xmodem transfer.
Well I'm trying right now to change the baud rate and yet no luck I'll keep trying of course and let you know. When you say that someone may have adjusted it for an Xmodem transfer you mean the switch? -
blackened
Member Posts: 30 ■■□□□□□□□□
So I tried every single value that hyperterminal allows for baud rate and no luck, just in some cases I received junk characters, but nothing else.
I tried with the values:
Baud Rate: 110, 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, from here it wouldn't let me continue 230400, 460800, 921600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Am I doing sth wrong? Or is there the possibility that the switch is faulty?
Regards. -
Chris_
Member Posts: 326
Yes, I meant someone may have adjusted the switch.
Not sure what to suggest. I have had problems in the past with USB to serial adaptors but always fixed this by reinstalling. Have you got a different serial port you can try?Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
blackened
Member Posts: 30 ■■□□□□□□□□
Yes, I meant someone may have adjusted the switch.
Not sure what to suggest. I have had problems in the past with USB to serial adaptors but always fixed this by reinstalling. Have you got a different serial port you can try?
Hello Chris, yes indeed I had tried in two pc, with different console cables also, and I get the very same result, I even changed my USB keyboard to a PS/2 but that doesn't seem to matter.
Maybe I'm not seeing the obvious, I have an universal computer cable power cord to the switch, my console cable connected to the pc serial port.
When I turn the switch on all ports the light is kinda orange, I get a green light at STAT and SYST.
I hit mode to UTIL and the first two ports green light, DUPLEX and SPEED shows nothing, guess that's normal.
Might even sound silly all this, but I have no idea what this could be, I was really excited when my switch arrived, but now I can't make it work... -
Chris_
Member Posts: 326
It may just be a faulty console port
It's obvious noone's done anything funky with the config as you are getting initial setup prompts, so there is no config.
Maybe try booting the switch with the mode button held in for 20 secs ( i think) which should give it a clean wipe - is it off eBay?Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
blackened
Member Posts: 30 ■■□□□□□□□□
Hi again, I think I might found something, I was fooling around and connected my default gateway to port 17 with a straight through cable, then I connected my laptop to port 20 (and then unplugget it later) with another straight through cable and got this:
00:07:43: %LINK-3-UPDOWN: Interface FastEthernet0/17, changed state to up 00:07:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, chan ged state to up 00:08:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state t o up 00:08:20: AUTOINSTALL: Vlan1 is assigned 192.168.1.93 00:08:20: AUTOINSTALL: Obtain siaddr 192.168.1.254 (as config server) 00:08:20: AUTOINSTALL: Obtain default router (opt 3) 192.168.1.254 %Error opening tftp://192.168.1.254/network-confg (Timed out) %Error opening tftp://192.168.1.254/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.254/router-confg (Timed out) 00:10:27: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up 00:10:28: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, chan ged state to down 00:10:30: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, chan ged state to up %Error opening tftp://192.168.1.254/ciscortr.cfg (Timed out) %Error opening tftp://192.168.1.254/network-confg (Timed out) %Error opening tftp://192.168.1.254/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.254/router-confg (Timed out) %Error opening tftp://192.168.1.254/ciscortr.cfg (Timed out) %Error opening tftp://192.168.1.254/network-confg (Timed out) 00:14:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, chan ged state to down %Error opening tftp://192.168.1.254/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.254/router-confg (Timed out) %Error opening tftp://192.168.1.254/ciscortr.cfg (Timed out) %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out) %Error opening tftp://255.255.255.255/router-confg (Timed out) %Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out) %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
I tried to telnet it, but:telnet 192.168.1.93 Trying 192.168.1.93... Connected to 192.168.1.93. Escape character is '^]'. Password required, but none set Connection closed by foreign host.
It just won't let me.
Looks like it's trying to boot from an tftp server? Like I said I'm pretty new to all this cisco stuff, I hope this 'extra info' helps and hope someone could help me to interpret this. -
blackened
Member Posts: 30 ■■□□□□□□□□
It may just be a faulty console port
It's obvious noone's done anything funky with the config as you are getting initial setup prompts, so there is no config.
Maybe try booting the switch with the mode button held in for 20 secs ( i think) which should give it a clean wipe - is it off eBay?
I hope that's not the case of the faulty console port
Sorry looks like we posted almost at the same time, hadn't seen your message, after what I posted, you think someone might let the switch configured to sth specific and won't boot because of that?
Yes I'm reading about the clean wipe and I wasn't very sure, but now that you said it I think doesn't sound that crazy as I thought.
No unfortunately it's not from ebay... -
Chris_
Member Posts: 326
I think there is a way to get this going, can you set up a dhcp server and a tftp server on your Pc?Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
ramirer
Member Posts: 27 ■□□□□□□□□□
With the 2960s we use at school I learned (the very annoying way) that having the Scroll Lock button enabled didn't allow any keyboard response. I was literally there for about 30 minutes going WTF... when I did disable it my teacher just started to laughing at me. It might be a long shot but try it, you never know.
-
blackened
Member Posts: 30 ■■□□□□□□□□
Yes I believe I can, I've done the dhcp server before, just not sure exactly of the parameters I need this time, and I think I can manage the tftp server as well. Thanks for all of your help so far.
-
blackened
Member Posts: 30 ■■□□□□□□□□
With the 2960s we use at school I learned (the very annoying way) that having the Scroll Lock button enabled didn't allow any keyboard response. I was literally there for about 30 minutes going WTF... when I did disable it my teacher just started to laughing at me. It might be a long shot but try it, you never know.
Hi, thanks for the advice, but unfortunately I already tried this and no luck -
Chris_
Member Posts: 326
I think if you were to get switch to dhcp and place a config file with telnet passwords into the root of the tftp server them the switch would boot to this config, I've never tried it bit worth a shot.Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
blackened
Member Posts: 30 ■■□□□□□□□□
Are you using just tera term? Have you tried Hyperterminal?
Hi, I've used both, as a matter of fact I used hyperterminal to test the values I provided earlier in this topic... Anyways thanks for the advice. -
blackened
Member Posts: 30 ■■□□□□□□□□
I think if you were to get switch to dhcp and place a config file with telnet passwords into the root of the tftp server them the switch would boot to this config, I've never tried it bit worth a shot.
Ok I think I got it, so for booting from a tftp server (my computer), I only need to provide a valid config file, no IOS image or anything? -
billyr
Member Posts: 186
Hi again, I think I might found something, I was fooling around and connected my default gateway to port 17 with a straight through cable, then I connected my laptop to port 20 (and then unplugget it later) with another straight through cable and got this:
00:07:43: %LINK-3-UPDOWN: Interface FastEthernet0/17, changed state to up 00:07:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/17, chan ged state to up 00:08:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state t o up 00:08:20: AUTOINSTALL: Vlan1 is assigned 192.168.1.93 00:08:20: AUTOINSTALL: Obtain siaddr 192.168.1.254 (as config server) 00:08:20: AUTOINSTALL: Obtain default router (opt 3) 192.168.1.254 %Error opening tftp://192.168.1.254/network-confg (Timed out) %Error opening tftp://192.168.1.254/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.254/router-confg (Timed out) 00:10:27: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up 00:10:28: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, chan ged state to down 00:10:30: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, chan ged state to up %Error opening tftp://192.168.1.254/ciscortr.cfg (Timed out) %Error opening tftp://192.168.1.254/network-confg (Timed out) %Error opening tftp://192.168.1.254/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.254/router-confg (Timed out) %Error opening tftp://192.168.1.254/ciscortr.cfg (Timed out) %Error opening tftp://192.168.1.254/network-confg (Timed out) 00:14:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, chan ged state to down %Error opening tftp://192.168.1.254/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.254/router-confg (Timed out) %Error opening tftp://192.168.1.254/ciscortr.cfg (Timed out) %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out) %Error opening tftp://255.255.255.255/router-confg (Timed out) %Error opening tftp://255.255.255.255/ciscortr.cfg (Timed out) %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
I tried to telnet it, but:telnet 192.168.1.93 Trying 192.168.1.93... Connected to 192.168.1.93. Escape character is '^]'. Password required, but none set Connection closed by foreign host.
It just won't let me.
Looks like it's trying to boot from an tftp server? Like I said I'm pretty new to all this cisco stuff, I hope this 'extra info' helps and hope someone could help me to interpret this.
OK, I think we can get this working, brace yourself:
When you boot your switch up, it has no working config so it will either boot up into its default mode (where it asks you the yes/no question) or if it detects it is part of a live network it will start searching for a tftp server for a config. This is all the error messages you see above as it fails to find a config.
The reason your VLAN picked up an I.P address was probably because your home router is running DHCP, hence the 192.168.1.253 address.
You won't be able to telnet in though because there is no password on your VTY lines.
A work around as previously mentioned could be to set up a tftp server on your p.c. tftpd32 is easy to set up and free.
In your tftp server save a working config to get you up and running, just something simple:
!
enable secret cisco
!
line vty 0 15
password cisco
login
!
int vlan 1
ip address 192.168.1.93 255.255.255.0
no shutdown
!
end
!
save it as one of the filenames it's searching for above: e.g. network-confg
Make sure when you save it that you delete any file extensions off the end such as .txt
Plug your cables back in as you had them before, turn the switch off/on again then wait a wee bit watching for it to hopefully find the config.
If successful, try telnet access as before.
edited to add: in answer to the above question, it's already got the IOS on it contained in it's flash memory, youll see it being extracted and loaded into ram when you start the device up, thats all the little hash symbols you see going across the screen. All it will need is the startup config, bit of a strange fault though, definately a new one on me. -
Chris_
Member Posts: 326
There you go, billyr gave you the detailed instructions. Let us know how it goes. By the way, you can boot to an iOS on a tftp server also, in case you ever need to, I did in on a lab router that didn't have enough flash for the image I was using.Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
blackened
Member Posts: 30 ■■□□□□□□□□
Great, I think after a few errors I managed to load the file, look:
%Error opening tftp://192.168.1.253/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.253/router-confg (Timed out) %Error opening tftp://192.168.1.253/ciscortr.cfg (Timed out) %Error opening tftp://192.168.1.253/network-confg (Timed out) %Error opening tftp://192.168.1.253/cisconet.cfg (Timed out) %Error opening tftp://192.168.1.253/router-confg (Timed out) %Error opening tftp://192.168.1.253/ciscortr.cfg (Timed out) Loading network-confg from 192.168.1.254 (via Vlan1): ! [OK - 130/4096 bytes] line con 0 15 ^ % Invalid input detected at '^' marker. password cisco ^ % Invalid input detected at '^' marker. login ^ % Invalid input detected at '^' marker. 00:12:06: %SYS-5-CONFIG_I: Configured from tftp://255.255.255.255/network-confg by console
I copied and pasted the sample of config you guys gave me, what do you guys think, or am I doing sth wrong? -
Chris_
Member Posts: 326
Just get rid of the 15 on the line 'line con 0 15'
I think Billy was thinking of vty ports.Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
Chris_
Member Posts: 326
My mistake, change it to 'line vty 0 15'Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
blackened
Member Posts: 30 ■■□□□□□□□□
It Worked!!!
telnet 192.168.1.93 Trying 192.168.1.93... Connected to 192.168.1.93. Escape character is '^]'. User Access Verification Password: Switch>enable Password: Switch#show start Switch#show startup-config %% Non-volatile configuration memory is not present Switch#
Now, how do I fix this to properly boot locally from the switch?
Thank you for all of your help! -
Chris_
Member Posts: 326
Do a dir flash:/ to see what ios is installed, yours should be c2950-i6q4l2-mz.121-9.EA1.bin.
Go into config mode and issue boot system flash:/c2950-i6q4l2-mz.121-9.EA1.bin.
Save it with wr and then issue a reload.
The switch is already booting from the local IOS, the problem is it's loading it's config from TFTP - "%% Non-volatile configuration memory is not present"
to stop this, set your IP address on Interface VLAN 1 to whatever you want it to be then, to disable the tftp boot
configure terminal
no service config
exit
copy running-config startup-config
This will put the running config into NVRAM and boot from this in the future
Considering your Console issue you may want to leave the service config in place; if there is no TFTP server to go to then it will load the startup-config from NVRAM anyway.
Isn't it amazing what you learn when you have to, and how satisfying it is
Going all out for Voice. Don't worry Data; I'll never forget you
:study: CVoice [X] CIPT 1 [ ] CIPT 2 [ ] CAPPS [ ] TVOICE [ ] -
CodeBlox
Member Posts: 1,363 ■■■■□□□□□□
[B]c2950-i6q4[color=red]l[/color]2-mz.121-9.EA1.bin[/B].
Be sure and put that character as an 'L' lower case. It looks like a 1 in the "dir" output. Had me stumped as to why my "boot" and "copy" commands weren't working a while ago.Currently reading: Network Warrior, Unix Network Programming by Richard Stevens -
blackened
Member Posts: 30 ■■□□□□□□□□
The switch is already booting from the local IOS, the problem is it's loading it's config from TFTP - "%% Non-volatile configuration memory is not present"
to stop this, set your IP address on Interface VLAN 1 to whatever you want it to be then, to disable the tftp boot
configure terminal
no service config
exit
copy running-config startup-config
This will put the running config into NVRAM and boot from this in the future
Considering your Console issue you may want to leave the service config in place; if there is no TFTP server to go to then it will load the startup-config from NVRAM anyway.
Isn't it amazing what you learn when you have to, and how satisfying it is
Yes, thank you guys, I still can't communicate to the switch via hyperterminal, I did your suggestions and no more TFTP error
Yes it is amazing, motivates me to get started right away! -
billyr
Member Posts: 186
Just get rid of the 15 on the line 'line con 0 15'
I think Billy was thinking of vty ports.
In my defence, I'd had a few beers
, yes I meant line vty not console, sorry. -
blackened
Member Posts: 30 ■■□□□□□□□□
Guys I have a question, Would it be bad if I try to wipe the config, like they mention in this link
I say this because I still can't manage the switch via 'hyperterminal', here's the startup-config:Switch#show startup-config Using 1528 out of 32768 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable secret 5 $1$c5VP$wwu8IfyILXPerUn2VEoDB1 ! ip subnet-zero ! spanning-tree extend system-id ! ! interface FastEthernet0/1 no ip address ! interface FastEthernet0/2 no ip address ! interface FastEthernet0/3 no ip address ! interface FastEthernet0/4 no ip address ! interface FastEthernet0/5 no ip address ! interface FastEthernet0/6 no ip address ! interface FastEthernet0/7 no ip address ! interface FastEthernet0/8 no ip address ! interface FastEthernet0/9 no ip address ! interface FastEthernet0/10 no ip address ! interface FastEthernet0/11 no ip address ! interface FastEthernet0/12 no ip address ! interface FastEthernet0/13 no ip address ! interface FastEthernet0/14 no ip address ! interface FastEthernet0/15 no ip address ! interface FastEthernet0/16 no ip address ! interface FastEthernet0/17 no ip address ! interface FastEthernet0/18 no ip address ! interface FastEthernet0/19 no ip address ! interface FastEthernet0/20 no ip address ! interface FastEthernet0/21 no ip address ! interface FastEthernet0/22 no ip address ! interface FastEthernet0/23 no ip address ! interface FastEthernet0/24 no ip address ! interface Vlan1 ip address 192.168.1.93 255.255.255.0 no ip route-cache ! ip default-gateway 192.168.1.254 ip http server ! ! line con 0 exec-timeout 0 0 line vty 0 4 password cisco login line vty 5 15 password cisco login ! end
Is it possible that a buggy setting it's causing the problem of the console?
Is it a faulty console port? I'm afraid of losing remote access to the switch.
A bit of advice would be great. Thanks in advance. -
Lazydog
Member Posts: 19 ■□□□□□□□□□
Not sure if the con port is listed in the POST output, but you could run sh tech and look at the POST output to see if there is anything in there that might give a clue as to the status of the con port. This will produce a lot of output so you might want to write the output to a file.--
Regards
Robert
Smile....... it increases your face value! -
blackened
Member Posts: 30 ■■□□□□□□□□
Hi, thanks for your replies, here's the sh tech output:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.05.14 14:29:51 =~=~=~=~=~=~=~=~=~=~=~= User Access Verification Password: Switch>ena Password: Switch#sh tech ------------------ show version ------------------ Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Wed 24-Apr-02 06:57 by antonino Image text-base: 0x80010000, data-base: 0x804E8000 ROM: Bootstrap program is CALHOUN boot loader Switch uptime is 10 minutes System returned to ROM by power-on System image file is "flash:/c2950-i6q4l2-mz.121-9.EA1.bin" cisco WS-C2950-24 (RC32300) processor (revision E0) with 20815K bytes of memory. Processor board ID FHK0625Y220 Last reset from system-reset Running Standard Image 24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:0A:41:17:47:40 Motherboard assembly number: 73-5781-10 Power supply part number: 34-0965-01 Motherboard serial number: FOC06250BMJ Power supply serial number: DAB06244U1T Model revision number: E0 Motherboard revision number: B0 Model number: WS-C2950-24 System serial number: FHK0625Y220 Configuration register is 0xF ------------------ show running-config ------------------ Building configuration... Current configuration : 1515 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable secret 5 <removed> ! ip subnet-zero ! spanning-tree extend system-id ! ! interface FastEthernet0/1 no ip address ! interface FastEthernet0/2 no ip address ! interface FastEthernet0/3 no ip address ! interface FastEthernet0/4 no ip address ! interface FastEthernet0/5 no ip address ! interface FastEthernet0/6 no ip address ! interface FastEthernet0/7 no ip address ! interface FastEthernet0/8 no ip address ! interface FastEthernet0/9 no ip address ! interface FastEthernet0/10 no ip address ! interface FastEthernet0/11 no ip address ! interface FastEthernet0/12 no ip address ! interface FastEthernet0/13 no ip address ! interface FastEthernet0/14 no ip address ! interface FastEthernet0/15 no ip address ! interface FastEthernet0/16 no ip address ! interface FastEthernet0/17 no ip address ! interface FastEthernet0/18 no ip address ! interface FastEthernet0/19 no ip address ! interface FastEthernet0/20 no ip address ! interface FastEthernet0/21 no ip address ! interface FastEthernet0/22 no ip address ! interface FastEthernet0/23 no ip address ! interface FastEthernet0/24 no ip address ! interface Vlan1 ip address 192.168.1.93 255.255.255.0 no ip route-cache ! ip default-gateway 192.168.1.254 ip http server ! ! line con 0 exec-timeout 0 0 line vty 0 4 password <removed> login line vty 5 15 password <removed> login ! end ------------------ show stacks ------------------ Minimum process stacks: Free/Size Name 4928/6000 calhoun_flash init 5592/6000 SPAN Subsystem 5580/6000 platform SPAN Subsystem 9872/12000 Init 5300/6000 RADIUS INITCONFIG 7708/9000 DHCP Client 8420/12000 Virtual Exec Interrupt level stacks: Level Called Unused/Size Name 3 2488 8292/9000 StrataSwitch 4 809 8688/9000 EIC intr 7 152276 8756/9000 Timer Interrupt Handler ------------------ show interfaces ------------------ Vlan1 is up, line protocol is up Hardware is CPU Interface, address is 000a.4117.4740 (bia 000a.4117.4740) Internet address is 192.168.1.93/24 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 2000 bits/sec, 3 packets/sec 5 minute output rate 2000 bits/sec, 4 packets/sec 1125 packets input, 78349 bytes, 0 no buffer Received 698 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 782 packets output, 171485 bytes, 0 underruns 0 output errors, 2 interface resets 0 output buffer failures, 0 output buffers swapped out FastEthernet0/1 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4741 (bia 000a.4117.4741) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/2 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4742 (bia 000a.4117.4742) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/3 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4743 (bia 000a.4117.4743) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/4 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4744 (bia 000a.4117.4744) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/5 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4745 (bia 000a.4117.4745) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/6 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4746 (bia 000a.4117.4746) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/7 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4747 (bia 000a.4117.4747) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/8 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4748 (bia 000a.4117.474[IMG]https://us.v-cdn.net/6030959/uploads/images/smilies/icon_cool.gif[/IMG] MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/9 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4749 (bia 000a.4117.4749) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/10 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.474a (bia 000a.4117.474a) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/11 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.474b (bia 000a.4117.474b) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/12 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.474c (bia 000a.4117.474c) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/13 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.474d (bia 000a.4117.474d) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/14 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.474e (bia 000a.4117.474e) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/15 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.474f (bia 000a.4117.474f) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/16 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4750 (bia 000a.4117.4750) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/17 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4751 (bia 000a.4117.4751) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/18 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4752 (bia 000a.4117.4752) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/19 is up, line protocol is up Hardware is Fast Ethernet, address is 000a.4117.4753 (bia 000a.4117.4753) MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 3000 bits/sec, 4 packets/sec 5 minute output rate 2000 bits/sec, 3 packets/sec 1118 packets input, 77901 bytes, 0 no buffer Received 701 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 4 multicast, 0 pause input 0 input packets with dribble condition detected 783 packets output, 169903 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/20 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4754 (bia 000a.4117.4754) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/21 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4755 (bia 000a.4117.4755) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/22 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4756 (bia 000a.4117.4756) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/23 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4757 (bia 000a.4117.4757) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out FastEthernet0/24 is down, line protocol is down Hardware is Fast Ethernet, address is 000a.4117.4758 (bia 000a.4117.475[IMG]https://us.v-cdn.net/6030959/uploads/images/smilies/icon_cool.gif[/IMG] MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed input flow-control is off, output flow-control is off ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 00:09:57, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1 packets input, 64 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 64 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out ------------------ show controllers ------------------ HWIdb = 80D51900 Mngmnt Vlan = 1 ******* Rx Free Pool Size= 017E ***********PCI Registers*********** CMIC_DMA_STAT = 00102004 CMIC_CONFIG = 000C2848 CMIC_DMA_DESC0 = A0834280 CMIC_DMA_DESC1 = 6F5FABF7 CMIC_DMA_DESC2 = A083795C CMIC_DMA_DESC3 = A0838294 CMIC_IRQ_MASK = 0003FFCC CMIC_IRQ_STAT = 00080021 CMIC_DMA_CTRL = 00001111 CMIC_SCHAN_CTRL = 0004A042 CMIC_DLF_REG = 0BFFFFFF ******S-Channel Registers****** EGR_BKP_DIS =00000000 MMUPORTENABLE =0BFFFFFF EPC_HOL =00000000 ******COS Related Registers****** ******For CosVal.:0 Register Values****** COS_ENABLE = 00000000 ******For CosVal.:1 Register Values****** COS_ENABLE = 00000000 ******For CosVal.:2 Register Values****** COS_ENABLE = 00000000 ******For CosVal.:3 Register Values****** COS_ENABLE = 00000000 ******Block Specific Registers****** ******For BlockNo.:0 Register Values****** EGR_ENABLE = 00000000 EPC_LINK =08040000 CONFIG = 400081D8 ******For BlockNo.:1 Register Values****** EGR_ENABLE = 00000000 EPC_LINK =08040000 CONFIG = 400081D8 ******For BlockNo.:2 Register Values****** EGR_ENABLE = 00000004 EPC_LINK =08040000 CONFIG = 400081D8 ******For BlockNo.:3 Register Values****** GEGR_ENABLE = 00000000 EPC_LINK =08040000 CONFIG = 400001D8 ******For BlockNo.:4 Register Values****** GEGR_ENABLE = 00000000 EPC_LINK =08040000 CONFIG = 400001D8 ******Port Specific Registers****** ******For Port No.:0 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:1 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:2 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:3 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:4 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:5 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:6 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:7 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:8 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:9 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:A Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:B Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:C Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:D Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:E Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:F Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:10 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:11 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:12 Register Values****** FE_MAC1 = 00000001 FE_MAC2 = 0000C001 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:13 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:14 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:15 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:16 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:17 Register Values****** FE_MAC1 = 00000000 FE_MAC2 = 0000C000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:18 Register Values****** GMACC1_GPIC0b = 00021001 GMACC1_GPIC1b = 00021001 GTH_FE_MAC1_GPIC0b =00008000 GTH_FE_MAC1_GPIC1b = 00008000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ******For Port No.:19 Register Values****** GMACC1_GPIC0b = 00021001 GMACC1_GPIC1b = 00021001 GTH_FE_MAC1_GPIC0b =00008000 GTH_FE_MAC1_GPIC1b = 00008000 LCCCOUNT = 00000000 GCCCOUNT = 00000000 ----------- Tx Queue Status -------------- Ch 1 Status = 1 Ch 2 Status = 1 Ch1 QLen=00 Ch2 QLen=00 ----------- Rx Queue Status -------------- Ch1 Status = 0 | Ch2 Status = 4 | Throttle = No Ch1 Base = A0839AC0 Ch2 Base = A0839AC0 Ch1 End = A0838258 Ch2 End = A0839EB0 Ch1 Rd Ptr = A08381E8 Ch2 Rd Ptr = A0839AC0 Ch1 Alloc Ptr = 00000000 Ch2 Alloc Ptr = 00000000 Forward Mask = 00040000 Utagged bitmap = 00040000 ------------ Error Counters -------- PCI Parity Error= 00000000 PCI Fatal Error = 00000000 ------------------ show process memory ------------------ Total: 9095776, Used: 3296876, Free: 5798900 PID TTY Allocated Freed Holding Getbufs Retbufs Process 0 0 66904 5048 2661456 0 0 *Init* 0 0 624 62808 624 0 0 *Sched* 0 0 4486324 1314024 164916 909872 0 *Dead* 1 0 280 280 3808 0 0 Load Meter 2 0 1524 336 7056 0 0 Spanning Tree 3 0 0 0 6808 0 0 Check heaps 4 0 96 0 6904 0 0 Chunk Manager 5 0 96 0 6904 0 0 Pool Manager 6 0 280 280 6808 0 0 Timers 7 0 732 72 7468 0 0 Entity MIB API 8 0 0 0 6808 0 0 HC Counter Timer 9 0 188 92 6996 0 0 ARP Input 10 0 192 0 7000 0 0 Net Input 11 0 96 0 6904 0 0 Critical Bkgnd 12 0 20784 0 13168 0 0 Net Background 13 0 376 280 12904 0 0 Logger 14 0 280 280 6808 0 0 TTY Background 15 0 0 0 9808 0 0 Per-Second Jobs 16 0 512 280 4040 0 0 Calhoun Storm Co 17 0 0 0 6808 0 0 Calhoun LED Proc 18 0 178656 178656 3808 0 0 Calhoun Statisti 19 0 280 280 6808 0 0 Compute load avg 20 0 0 0 6808 0 0 Per-minute Jobs 21 0 376 280 6904 0 0 HMATM Learn proc 22 0 1172 280 7428 0 0 CalhounPM 23 0 280 280 6808 0 0 Link Status Proc 24 0 248 0 7056 0 0 CalhounInsIpopti 25 0 2544 280 9072 0 0 CDP Protocol 26 0 3872 0 16680 0 0 IP Input 27 0 12588 280 10932 0 0 DTP Protocol 28 0 280 280 6808 0 0 EtherChnl 29 0 9300 1816 14152 0 0 VLAN Manager 30 0 280 280 6808 0 0 PI MATM Aging Pr 31 0 604 280 7132 0 0 UDLD 32 0 836 280 7364 0 0 dot1x 33 0 23176 1432 21744 0 0 DHCPD Receive 34 0 0 0 6808 0 0 HTTP Timer 35 0 96 0 6904 0 0 RARP Input 36 0 0 0 12808 0 0 TCP Timer 37 0 43236 0 16016 0 0 TCP Protocols 38 0 0 0 6808 0 0 Socket Timers 39 0 524 452 7332 0 0 L2MM 40 0 192 0 7000 0 0 MRD 41 0 96 0 6904 0 0 IGMPSN 42 0 248 0 4056 0 0 IGMP Snooping Pr 43 0 248 0 4056 0 0 IGMP Snooping Re 44 0 232 0 7040 0 0 pSecureProcess 45 0 376 280 6904 0 0 Cluster L2 46 0 96 0 6904 0 0 Cluster RARP 47 0 972 280 7500 0 0 Cluster Base 48 1 177316 176200 13924 0 0 Virtual Exec 49 0 96 68 6904 0 0 Router Autoconf 50 0 96 0 6904 0 0 Syslog Traps 51 0 0 0 6808 0 0 AggMgr Process 52 0 248 2276 7056 0 0 PM Callback 53 0 5108 280 11636 0 0 VTP Trap Process 54 0 0 0 6808 0 0 DHCPD Timer 55 0 376 280 3904 0 0 STP STACK TOPOLO 56 0 376 280 3904 0 0 STP FAST TRANSIT 57 2 167760 166796 13772 0 0 Virtual Exec 58 0 280 280 6828 0 0 IP NAT Ager 3295796 Total ------------------ show process cpu ------------------ CPU utilization for five seconds: 2%/0%; one minute: 1%; five minutes: 1% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 1 0 120 0 0.00% 0.00% 0.00% 0 Load Meter 2 12 590 20 0.00% 0.00% 0.00% 0 Spanning Tree 3 132 63 2095 0.00% 0.00% 0.00% 0 Check heaps 4 0 1 0 0.00% 0.00% 0.00% 0 Chunk Manager 5 0 1 0 0.00% 0.00% 0.00% 0 Pool Manager 6 0 2 0 0.00% 0.00% 0.00% 0 Timers 7 0 2 0 0.00% 0.00% 0.00% 0 Entity MIB API 8 0 120 0 0.00% 0.00% 0.00% 0 HC Counter Timer 9 272 638 426 0.00% 0.02% 0.02% 0 ARP Input 10 4 1 4000 0.00% 0.00% 0.00% 0 Net Input 11 0 1 0 0.00% 0.00% 0.00% 0 Critical Bkgnd 12 24 1542 15 0.00% 0.00% 0.00% 0 Net Background 13 0 10 0 0.00% 0.00% 0.00% 0 Logger 14 4 591 6 0.00% 0.00% 0.00% 0 TTY Background 15 0 598 0 0.00% 0.00% 0.00% 0 Per-Second Jobs 16 0 2 0 0.00% 0.00% 0.00% 0 Calhoun Storm Co 17 88 14837 5 0.00% 0.00% 0.00% 0 Calhoun LED Proc 18 2376 1183 2008 0.32% 0.36% 0.34% 0 Calhoun Statisti 19 0 121 0 0.00% 0.00% 0.00% 0 Compute load avg 20 72 10 7200 0.00% 0.00% 0.00% 0 Per-minute Jobs 21 16 2968 5 0.00% 0.00% 0.00% 0 HMATM Learn proc 22 28 3 9333 0.00% 0.00% 0.00% 0 CalhounPM 23 40 2968 13 0.00% 0.00% 0.00% 0 Link Status Proc 24 0 1 0 0.00% 0.00% 0.00% 0 CalhounInsIpopti 25 8 67 119 0.00% 0.00% 0.00% 0 CDP Protocol 26 260 377 689 0.24% 0.03% 0.00% 0 IP Input 27 12 24 500 0.00% 0.00% 0.00% 0 DTP Protocol 28 0 61 0 0.00% 0.00% 0.00% 0 EtherChnl 29 12 3 4000 0.00% 0.00% 0.00% 0 VLAN Manager 30 0 2 0 0.00% 0.00% 0.00% 0 PI MATM Aging Pr 31 0 596 0 0.00% 0.00% 0.00% 0 UDLD 32 8 5 1600 0.00% 0.00% 0.00% 0 dot1x 33 8 5 1600 0.00% 0.00% 0.00% 0 DHCPD Receive 34 0 1 0 0.00% 0.00% 0.00% 0 HTTP Timer 35 0 1 0 0.00% 0.00% 0.00% 0 RARP Input 36 0 30 0 0.00% 0.00% 0.00% 0 TCP Timer 37 12 7 1714 0.00% 0.00% 0.00% 0 TCP Protocols 38 0 1 0 0.00% 0.00% 0.00% 0 Socket Timers 39 4 3 1333 0.00% 0.00% 0.00% 0 L2MM 40 0 3 0 0.00% 0.00% 0.00% 0 MRD 41 0 1 0 0.00% 0.00% 0.00% 0 IGMPSN 42 0 3 0 0.00% 0.00% 0.00% 0 IGMP Snooping Pr 43 0 5 0 0.00% 0.00% 0.00% 0 IGMP Snooping Re 44 0 10 0 0.00% 0.00% 0.00% 0 pSecureProcess 45 0 10 0 0.00% 0.00% 0.00% 0 Cluster L2 46 0 60 0 0.00% 0.00% 0.00% 0 Cluster RARP 47 4 77 51 0.00% 0.00% 0.00% 0 Cluster Base 48 2552 12178 209 0.00% 0.00% 0.23% 1 Virtual Exec 49 0 2 0 0.00% 0.00% 0.00% 0 Router Autoconf 50 0 1 0 0.00% 0.00% 0.00% 0 Syslog Traps 51 0 1 0 0.00% 0.00% 0.00% 0 AggMgr Process 52 4 1540 2 0.00% 0.00% 0.00% 0 PM Callback 53 0 3 0 0.00% 0.00% 0.00% 0 VTP Trap Process 54 0 5 0 0.00% 0.00% 0.00% 0 DHCPD Timer 55 0 2 0 0.00% 0.00% 0.00% 0 STP STACK TOPOLO 56 4 2 2000 0.00% 0.00% 0.00% 0 STP FAST TRANSIT 57 2540 20406 124 2.04% 0.17% 0.03% 2 Virtual Exec 58 0 2 0 0.00% 0.00% 0.00% 0 IP NAT Ager ------------------ Mempool statistics ------------------ Head Total(b) Used(b) Free(b) Lowest(b) Largest(b) Processor 80BA72C0 4547904 1989980 2557924 2374256 2368304 I/O A0750D80 4547876 1307004 3240872 3240872 3240868 ------------------ show region ------------------ Region Manager: Start End Size(b) Class Media Name 0x80010000 0x804E6C2F 5073968 IText R/W text 0x804E8000 0x8069AE5F 1781344 IData R/W data 0x8069AE60 0x80750D5F 745216 IBss R/W bss 0x80BA72C0 0x80FFD7FF 4547904 Local R/W heap 0xA0000000 0xA0FFD7FF 16766976 Local R/W main 0xA0750D80 0xA0BA729F 4547872 Iomem R/W main:iomem ------------------ show buffers ------------------ Buffer elements: 496 in free list (500 max allowed) 2596 hits, 0 misses, 0 created Public buffer pools: Small buffers, 104 bytes (total 25, permanent 25): 25 in free list (20 min, 60 max allowed) 475 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) Middle buffers, 600 bytes (total 15, permanent 15): 10 in free list (10 min, 30 max allowed) 414 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) Big buffers, 1524 bytes (total 8, permanent 5, peak 8 @ 00:09:05): 8 in free list (5 min, 10 max allowed) 16 hits, 1 misses, 0 trims, 3 created 0 failures (0 no memory) VeryBig buffers, 4520 bytes (total 0, permanent 0): 0 in free list (0 min, 10 max allowed) 0 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) Large buffers, 5024 bytes (total 0, permanent 0): 0 in free list (0 min, 5 max allowed) 0 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) Huge buffers, 18024 bytes (total 0, permanent 0): 0 in free list (0 min, 2 max allowed) 0 hits, 0 misses, 0 trims, 0 created 0 failures (0 no memory) Interface buffer pools: Calhoun Packet Receive Pool buffers, 1560 bytes (total 512, permanent 512): 382 in free list (0 min, 512 max allowed) 1351 hits, 0 misses Switch#exit
I attached a pdf file just in case. I hope this helps. -
blackened
Member Posts: 30 ■■□□□□□□□□
Here's the sh boot output:
Switch#sh boot BOOT path-list: flash:/c2950-i6q4l2-mz.121-9.EA1.bin Config file: flash:config.text Enable Break: no Manual Boot: no HELPER path-list: NVRAM/Config file buffer size: 32768
And the sh run:Switch#sh run Building configuration... Current configuration : 1528 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable secret 5 $1$c5VP$wwu8IfyILXPerUn2VEoDB1 ! ip subnet-zero ! spanning-tree extend system-id ! ! interface FastEthernet0/1 no ip address ! interface FastEthernet0/2 no ip address ! interface FastEthernet0/3 no ip address ! interface FastEthernet0/4 no ip address ! interface FastEthernet0/5 no ip address ! interface FastEthernet0/6 no ip address ! interface FastEthernet0/7 no ip address ! interface FastEthernet0/8 no ip address ! interface FastEthernet0/9 no ip address ! interface FastEthernet0/10 no ip address ! interface FastEthernet0/11 no ip address ! interface FastEthernet0/12 no ip address ! interface FastEthernet0/13 no ip address ! interface FastEthernet0/14 no ip address ! interface FastEthernet0/15 no ip address ! interface FastEthernet0/16 no ip address ! interface FastEthernet0/17 no ip address ! interface FastEthernet0/18 no ip address ! interface FastEthernet0/19 no ip address ! interface FastEthernet0/20 no ip address ! interface FastEthernet0/21 no ip address ! interface FastEthernet0/22 no ip address ! interface FastEthernet0/23 no ip address ! interface FastEthernet0/24 no ip address ! interface Vlan1 ip address 192.168.1.93 255.255.255.0 no ip route-cache ! ip default-gateway 192.168.1.254 ip http server ! ! line con 0 exec-timeout 0 0 line vty 0 4 password cisco login line vty 5 15 password cisco login ! end
I appreaciate both your help, again I hope this helps too.