Options
Gns3
Hi,
I've just started to use GNS3 but have run into a problem.
I've configured a loopback adapter on my PC which is connected to an Ethernet Switch, which is then connected to a 3700 router. PC IP is 10.0.0.10 /8, Router IP is 10.0.0.1 /8.
(See Lab.jpeg and ping.jpeg)
When I do a ping from the PC I get like 1 reply in 4, the rest are timeouts.
If a delete the switch and link the PC straight to the router then I can ping no problem.
It seems to be the Ethernet switch causing issues - What am I doing wrong ?
Thanks
Dan
I've just started to use GNS3 but have run into a problem.
I've configured a loopback adapter on my PC which is connected to an Ethernet Switch, which is then connected to a 3700 router. PC IP is 10.0.0.10 /8, Router IP is 10.0.0.1 /8.
(See Lab.jpeg and ping.jpeg)
When I do a ping from the PC I get like 1 reply in 4, the rest are timeouts.
If a delete the switch and link the PC straight to the router then I can ping no problem.
It seems to be the Ethernet switch causing issues - What am I doing wrong ?
Thanks
Dan
Comments
-
Options
amb1s1
Member Posts: 408
Check to see if you speed and duplex setting on both the router and pc. -
Options
esswok
Member Posts: 74 ■■□□□□□□□□
go to this link
GNS3 - How to connect GNS3 to a real router or switch and to the internet - YouTube
do what he says and you'll be good to go
(note) He does not use a loopback he use the actual LAC local area connection.