Options
Is this switch good for CCNA lab?
johnifanx98
Member Posts: 329
in CCNA & CCENT
Buy.com - Cisco SR224 24-Port 10/100 Unmanaged Switch, Refurbished
I just came across it this morning...
BTW, any criteria for choosing a switch for CCNA lab?
I just came across it this morning...
BTW, any criteria for choosing a switch for CCNA lab?
Comments
-
Optionscyberguypr Mod Posts: 6,928 ModShort answer is NO. An unmanaged switch is nothing but a glorified hub. It doesn't run IOS. There's nothing to configure.
Have you gone through the links ALXX posted on your other thread? Those have a lot of information that will clear most of the questions you may have. To sum up, your safest bet is a couple of 2950 switches. If you do your homework and don't rush you can find them on eBay anywhere from 30-60 bucks a piece. Also, have you searched here for "CCNA LAB"? There's a good number of lab setups, what works and what doesn't, sources for labs, etc. -
OptionsKrisA Member Posts: 142cyberguypr wrote: »Have you gone through the links ALXX posted on your other thread?
That was a timely and great read IMO. Yes it took a long time, Wendell is very winded, but a MUCH deeper understanding. I would HIGHLY recommend reading the blog.WGU Progress BSIT:NA | Current Term:1 | Transfered To-Do In Progress Completed
EWB2 BAC1 BBC1 TSV1 WFV1 CLC1 LAE1 LUT1 LAT1 AXV1 TTV1 INC1 INT1 TPV1 SST1 SSC1 GAC1 HHT1 TNV1 QLT1 BOV1 LET1 ORC1 IWC1 IWT1 MGC1 ABV1 AHV1 AJV1 TWA1 CPW2 BRV1
Currently Reading
Darril Book