Options
Hyperconf alternative?
ajmatson
Member Posts: 289
in CCNA & CCENT
Hello all,
I have been using Hyperconf by WinAgents (free version) for my lab which is extremely handy but has a 2 device limitation. Does anyone have any alternatives that are free or lower cost? I use a Mac so either Mac or Windows will work as I can run it in Parallels if need be
Just looking for a good manager to use.
Thx,
I have been using Hyperconf by WinAgents (free version) for my lab which is extremely handy but has a 2 device limitation. Does anyone have any alternatives that are free or lower cost? I use a Mac so either Mac or Windows will work as I can run it in Parallels if need be
Just looking for a good manager to use.Thx,
Working on currently:
Masters Degree Information Security and Assurance (WGU) / Estimated 06/01/2016
Next Up: CCNP Routing Exam | Certified Ethical Hacker Exam
Cisco Lab: ASA 5506-X, GNS3, 1x 2801 Router, 1x 2650XM, 1x 3750-48TS-E switch, 2x 3550 EMI Switches and 1x 2950T swtich.
Juniper Lab: 1x SRX100H2, 1x J2320 (1GB Flash/1GB RAM, JunOS 11.4R7.5), and 4 JunOS Firefly vSRX Routers in VMWare ESXi 5.1
Masters Degree Information Security and Assurance (WGU) / Estimated 06/01/2016
Next Up: CCNP Routing Exam | Certified Ethical Hacker Exam
Cisco Lab: ASA 5506-X, GNS3, 1x 2801 Router, 1x 2650XM, 1x 3750-48TS-E switch, 2x 3550 EMI Switches and 1x 2950T swtich.
Juniper Lab: 1x SRX100H2, 1x J2320 (1GB Flash/1GB RAM, JunOS 11.4R7.5), and 4 JunOS Firefly vSRX Routers in VMWare ESXi 5.1
Comments
-
Options
alxx
Member Posts: 755
kiwi cat tools ? There is a free version.
Kiwi CatTools | Network Configuration Management | Kiwi Syslog
would be nice to have a mac version.
Have writen a few python scripts for connecting to cisco routers.
haven't had the time to write one to grab a router config and save it to svn or git yetGoals CCNA by dec 2013, CCNP by end of 2014 -
Options
MosGuy
Member Posts: 195
For a management app, on my Mac I use minicom. Initially ms-read the question - thanks Alxx ---
XPS 15: i7-6700HQ, 256 pcie ssd, 32 GB RAM, 2 GB Nvidia GTX 960m, windows 10 Pro
Cert in progress: CCNA (2016 revision) -
Optionsalxx
Member Posts: 755
I thought he was asking about management tools not terminal programs ?
Can use minicom or screen on the mac for the serial connection.
iterm2 is nice but is only the actual terminal/console programGoals CCNA by dec 2013, CCNP by end of 2014