dumb question....

RyanCorbettRyanCorbett Member Posts: 54 ■■■□□□□□□□
what is the order of operations used to get a specified number of subnets and hosts ?...for example, i need 5 subnets with 5 hosts apiece, but the wildcard masking operation only leaves me with 3 subnets when i plug in the 5 and 5 for the subnet and host
operations...i hope this makes sense; thanks for any help you guys can provide....!icon_cry.gif

Comments

  • osJoeosJoe Member Posts: 61 ■■□□□□□□□□
    1. Determine number of required network ID's
    One for each LAN subnet
    One for each WAN segment

    2. Determine number of reuiqred host ID's per subnet
    One for each TCP/IP host
    One for each router interface

    3. Based on above requirements, create the following
    One subnet mask for entire network
    An unique subnet ID for each physical segment
    A range of host ID's for each subnet

    Is this what your looking for??
  • RyanCorbettRyanCorbett Member Posts: 54 ■■■□□□□□□□
    osJoe wrote: »
    1. Determine number of required network ID's
    One for each LAN subnet
    One for each WAN segment

    2. Determine number of reuiqred host ID's per subnet
    One for each TCP/IP host
    One for each router interface

    3. Based on above requirements, create the following
    One subnet mask for entire network
    An unique subnet ID for each physical segment
    A range of host ID's for each subnet

    Is this what your looking for??

    maybe...i'll give it a shot...thanks !
Sign In or Register to comment.