Cpa 2511
craigaaron
Member Posts: 132
in CCNA & CCENT
Hello all,
I have recently got a CPA 2511, i am having trouble trying to find an IOS for it and its running 11.0
Here is the spec of it
IOS (tm) 3000 Software (CPA25-Y-L), Version 11.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 21-Mar-96 00:34 by hochan
Image text-base: 0x03018CA8, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System restarted by power-on
System image file is "flash:cpa25-y-l.110-6", booted via flash
cisco CPA2511 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 03213093, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Primary Rate ISDN software, Version 1.0.
Authorized for CiscoPro software set only.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
16 terminal lines.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
I am planning to upgrade the flash also, so any ideas?
Thanks in advance
I have recently got a CPA 2511, i am having trouble trying to find an IOS for it and its running 11.0
Here is the spec of it
IOS (tm) 3000 Software (CPA25-Y-L), Version 11.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 21-Mar-96 00:34 by hochan
Image text-base: 0x03018CA8, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System restarted by power-on
System image file is "flash:cpa25-y-l.110-6", booted via flash
cisco CPA2511 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 03213093, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Primary Rate ISDN software, Version 1.0.
Authorized for CiscoPro software set only.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
16 terminal lines.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
I am planning to upgrade the flash also, so any ideas?
Thanks in advance
Currently Studying: CCNP Security
300-206 - Completed 04-Jul-2014
300-209 - Completed 09-May-2017
300-208 - TBC
300-210 - TBC
300-206 - Completed 04-Jul-2014
300-209 - Completed 09-May-2017
300-208 - TBC
300-210 - TBC
Comments
-
craigaaron
Member Posts: 132
interesting enough, i check it again today it now has an error of
isco Internetwork Operating System Software
IOS (tm) 3000 Software (CPA25-Y-L), Version 11.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Thu 21-Mar-96 00:34 by hochan
Image text-base: 0x03018CA8, data-base: 0x00001000
Exception: Line 1111 Emulator at 0x312200C (PC)
save_stack: discarding corrupt frame pointer (0x44230 )
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
Found invalid number of 512 KB pages=00000003
any ideas?Currently Studying: CCNP Security
300-206 - Completed 04-Jul-2014
300-209 - Completed 09-May-2017
300-208 - TBC
300-210 - TBC -
craigaaron
Member Posts: 132
it appears for that error message, replacing the ram workedCurrently Studying: CCNP Security
300-206 - Completed 04-Jul-2014
300-209 - Completed 09-May-2017
300-208 - TBC
300-210 - TBC
