Options
Problems of adding subscriber
aaaa2209
Member Posts: 12 ■□□□□□□□□□
Hello everyone,
I think I need help.It's a lab environment on ESXi.I am trying to install a subscriber and add it to the subscriber. A publisher is installed. IP is 192.168.1.86 and hostname is ccm8. The installing subscriber's IP is 192.168.1.87 and the hostname is ccm8sub. I did go to the publisher's CUCM admin -> System -> Servers to add a the subscriber.
I got several similar messages (see the attached pictures) as I tried several times.
I changed the admin and OS password of the publisher before. I found that only after I use the original password, the subscriber is authenticated through running the command ' show network cluster'. But the error message shows in pic 3
Below are some message from the publisher:
admin:show network cluster
192.168.1.86 ccm8 Publisher authenticated
192.168.1.87 ccm8sub Subscriber not authenticated - INITIATOR since Wed Jan 26 12:50:32 2011
after I changed to the original password:
admin:show network cluster
192.168.1.86 ccm8 Publisher authenticated
192.168.1.87 ccm8sub Subscriber authenticated using TCP since Wed Jan 26 13:17:54 2011
admin:utils network ping 192.168.1.87
PING 192.168.1.87 (192.168.1.87) 56(84) bytes of data.
64 bytes from 192.168.1.87: icmp_seq=0 ttl=64 time=0.198 ms
64 bytes from 192.168.1.87: icmp_seq=1 ttl=64 time=0.195 ms
64 bytes from 192.168.1.87: icmp_seq=2 ttl=64 time=0.197 ms
64 bytes from 192.168.1.87: icmp_seq=3 ttl=64 time=0.229 ms
--- 192.168.1.87 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 0.195/0.204/0.229/0.022 ms, pipe 2
admin:utils network ping ccm8
PING ccm8 (192.168.1.86) 56(84) bytes of data.
64 bytes from ccm8 (192.168.1.86): icmp_seq=0 ttl=64 time=0.032 ms
64 bytes from ccm8 (192.168.1.86): icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from ccm8 (192.168.1.86): icmp_seq=2 ttl=64 time=0.040 ms
64 bytes from ccm8 (192.168.1.86): icmp_seq=3 ttl=64 time=0.029 ms
--- ccm8 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3043ms
rtt min/avg/max/mdev = 0.029/0.033/0.040/0.005 ms, pipe 2
admin:utils network ping ccm8sub
PING ccm8sub (192.168.1.87) 56(84) bytes of data.
64 bytes from ccm8sub (192.168.1.87): icmp_seq=0 ttl=64 time=1.21 ms
64 bytes from ccm8sub (192.168.1.87): icmp_seq=1 ttl=64 time=0.189 ms
64 bytes from ccm8sub (192.168.1.87): icmp_seq=2 ttl=64 time=0.198 ms
64 bytes from ccm8sub (192.168.1.87): icmp_seq=3 ttl=64 time=0.204 ms
--- ccm8sub ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3146ms
rtt min/avg/max/mdev = 0.189/0.451/1.216/0.442 ms, pipe 2
admin:show network eth0 detail
Ethernet 0
DHCP : disabled Status : up
IP Address : 192.168.1.86 IP Mask : 255.255.255.000
Link Detected: yes Mode : Auto enabled, Full, 1000 Mbits/s
Duplicate IP : no
Queue Length : 1000 MTU : 1500
MAC Address : 00:0c:29:47:d9:a2
RX stats:
bytes : 247288456 packets : 2007605 errors : 0
dropped : 0 overrun : 0 mcast : 0
TX stats:
bytes : 344836027 packets : 674703 errors : 0
dropped : 0 carrier : 0 colsns : 0
DNS
Not configured.
Gateway : 192.168.1.168 on Ethernet 0
I think I need help.It's a lab environment on ESXi.I am trying to install a subscriber and add it to the subscriber. A publisher is installed. IP is 192.168.1.86 and hostname is ccm8. The installing subscriber's IP is 192.168.1.87 and the hostname is ccm8sub. I did go to the publisher's CUCM admin -> System -> Servers to add a the subscriber.
I got several similar messages (see the attached pictures) as I tried several times.
I changed the admin and OS password of the publisher before. I found that only after I use the original password, the subscriber is authenticated through running the command ' show network cluster'. But the error message shows in pic 3
Below are some message from the publisher:
admin:show network cluster
192.168.1.86 ccm8 Publisher authenticated
192.168.1.87 ccm8sub Subscriber not authenticated - INITIATOR since Wed Jan 26 12:50:32 2011
after I changed to the original password:
admin:show network cluster
192.168.1.86 ccm8 Publisher authenticated
192.168.1.87 ccm8sub Subscriber authenticated using TCP since Wed Jan 26 13:17:54 2011
admin:utils network ping 192.168.1.87
PING 192.168.1.87 (192.168.1.87) 56(84) bytes of data.
64 bytes from 192.168.1.87: icmp_seq=0 ttl=64 time=0.198 ms
64 bytes from 192.168.1.87: icmp_seq=1 ttl=64 time=0.195 ms
64 bytes from 192.168.1.87: icmp_seq=2 ttl=64 time=0.197 ms
64 bytes from 192.168.1.87: icmp_seq=3 ttl=64 time=0.229 ms
--- 192.168.1.87 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 0.195/0.204/0.229/0.022 ms, pipe 2
admin:utils network ping ccm8
PING ccm8 (192.168.1.86) 56(84) bytes of data.
64 bytes from ccm8 (192.168.1.86): icmp_seq=0 ttl=64 time=0.032 ms
64 bytes from ccm8 (192.168.1.86): icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from ccm8 (192.168.1.86): icmp_seq=2 ttl=64 time=0.040 ms
64 bytes from ccm8 (192.168.1.86): icmp_seq=3 ttl=64 time=0.029 ms
--- ccm8 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3043ms
rtt min/avg/max/mdev = 0.029/0.033/0.040/0.005 ms, pipe 2
admin:utils network ping ccm8sub
PING ccm8sub (192.168.1.87) 56(84) bytes of data.
64 bytes from ccm8sub (192.168.1.87): icmp_seq=0 ttl=64 time=1.21 ms
64 bytes from ccm8sub (192.168.1.87): icmp_seq=1 ttl=64 time=0.189 ms
64 bytes from ccm8sub (192.168.1.87): icmp_seq=2 ttl=64 time=0.198 ms
64 bytes from ccm8sub (192.168.1.87): icmp_seq=3 ttl=64 time=0.204 ms
--- ccm8sub ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3146ms
rtt min/avg/max/mdev = 0.189/0.451/1.216/0.442 ms, pipe 2
admin:show network eth0 detail
Ethernet 0
DHCP : disabled Status : up
IP Address : 192.168.1.86 IP Mask : 255.255.255.000
Link Detected: yes Mode : Auto enabled, Full, 1000 Mbits/s
Duplicate IP : no
Queue Length : 1000 MTU : 1500
MAC Address : 00:0c:29:47:d9:a2
RX stats:
bytes : 247288456 packets : 2007605 errors : 0
dropped : 0 overrun : 0 mcast : 0
TX stats:
bytes : 344836027 packets : 674703 errors : 0
dropped : 0 carrier : 0 colsns : 0
DNS
Not configured.
Gateway : 192.168.1.168 on Ethernet 0
Comments
-
Optionsaaaa2209
Member Posts: 12 ■□□□□□□□□□
Wow, it's almost a year I posted this.. haha, I just have the same problem and I solved it. I think I need to go to the System --> CUCM to add my subscriber as well. I probably didn't that I have to do that before I posted it. To sum up, I have to go to system - CUCM and System -server to add the subscriber.
The case closed..