Labbing ? : Why can my Laptop Ping everything but no SW or R can Ping it?

ciscoman2012

Very weird.

I will attach a picture of my network topology. My question is..I have no problem pinging everything on the network topology from my Acer Laptop. When I try to get on any of the Routers or Switches and ping the laptop (192.168.20.10) it always fails.

How can it fail if I can ping from my laptop fine? Literally nothing from the cisco devices will successfully ping the laptop. But all the Cisco devices can ping eachother no problem..as well as the laptop is able to ping all the Cisco devices from CMD on the laptop.

Any pointers?

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Excellent1

Disable your firewall, if you're running windows. I set up a custom rule to allow icmp from my lab ip ranges. It's not the most secure thing to do, but try it and see.

Edit: To clarify, disable whatever firewall you're using--and if it works, make a custom rule for whatever you're running for a firewall.

ciscoman2012

Excellent1 wrote: »

Disable your firewall, if you're running windows. I set up a custom rule to allow icmp from my lab ip ranges. It's not the most secure thing to do, but try it and see.

Edit: To clarify, disable whatever firewall you're using--and if it works, make a custom rule for whatever you're running for a firewall.

Well, that was easy.

So how should I make a custom rule for it? I'm using the regular firewall that comes with Windows 7 64bit.

fluk3d

How to enable ping response in windows 7? - Microsoft Answers

Excellent1

ciscoman2012 wrote: »

Well, that was easy.

So how should I make a custom rule for it? I'm using the regular firewall that comes with Windows 7 64bit.

I forget who it is, but someone on this site has a signature that says something like "an expert is someone who has made every mistake". That's paraphrasing, but I've been there, done that. I've loved every step of the way so far, but sometimes you find yourself reinventing the wheel on some things. I'll never forget 30 minutes I spent configuring my router, rebooting, and still being sent to the initial setup program. Gotta love the configuration register set to bypass the startup config.

Anyway, glad to help.

Excellent1

Also, out of curiosity, did you make that topology diagram, or is that copied from somewhere? I'm using visio to make diagrams, but I'm wondering what a lot of people are using these days.

alxx

viso on windows, omni graffle on mac and dia on linux for diagrams

can also use gsn3

ciscoman2012

Excellent1 wrote: »

Also, out of curiosity, did you make that topology diagram, or is that copied from somewhere? I'm using visio to make diagrams, but I'm wondering what a lot of people are using these days.

I used Visio 2007 to make it. Also have 2010 but haven't tried it yet. To see those symbols you'll need to click on Network under the template section and then Detailed Network Diagram. After that you'll click on the tab section that says "Network Symbols" to use all the ones like Switches / Routers.

alxx

You can download an icon pack and stencils from cisco

Network Topology Icons - Cisco Systems
Product Support Visio Stencils - Cisco Systems

This is all of the cisco visio stencils etc its 143MB
http://www.cisco.com/en/US/prod/assets/visio/product_visio_icon0900aecd80095127.zip

Not much difference between visio 2007 and 2010.

Excellent1

Yeah, I have the cisco stencils and I am familiar with the icons used, but I was interested in how you numbered the routers and switches. I always use text boxes, but it looks like you either have numbered icons or somehow applied a label to the data shape graphic. I've seen others do it, but my google-fu has not turned up any answers on how to accomplish this. Any pointers?

ciscoman2012

Excellent1 wrote: »

Yeah, I have the cisco stencils and I am familiar with the icons used, but I was interested in how you numbered the routers and switches. I always use text boxes, but it looks like you either have numbered icons or somehow applied a label to the data shape graphic. I've seen others do it, but my google-fu has not turned up any answers on how to accomplish this. Any pointers?

All I did was create a small text box and type "R1" in it and format it to bold and size 14 I believe. Then I just rotated the text some so that it sit nicely in the Router and Switch image. Then after I had it done I just copied and pasted it for all the other devices and just renamed the text.

Turgon

ciscoman2012 wrote: »

Very weird.

I will attach a picture of my network topology. My question is..I have no problem pinging everything on the network topology from my Acer Laptop. When I try to get on any of the Routers or Switches and ping the laptop (192.168.20.10) it always fails.

How can it fail if I can ping from my laptop fine? Literally nothing from the cisco devices will successfully ping the laptop. But all the Cisco devices can ping eachother no problem..as well as the laptop is able to ping all the Cisco devices from CMD on the laptop.

Any pointers?

You have routing. Layer 3 good. Layer 4 no good. Firewall.