Where is Aux port? noobish question

Hi Guys, im just messing around with the cisco IOS and im looking at configuring the aux port on a 2621XM router, the problem is in the interface i cant find it!Basically i get to global config and type following: Router(config)#line ? First Line number console Primary terminal line vty Virtual terminalThe options i have are console, VTY and line number but where is the aux port?Do i need to connect something to the port first? (as far as i am aware i didnt think you had to because this could be configured before a modem like device was plugged in)Please point me to what im missingOh ye and the router defenetly has an aux port.Thanks againDan

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Rakurai

try line aux 0

Don't quote me..... using 2651xm in GNS3, no routers here

should also be able to see it in show run:

line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4

Roguetadhg

line aux 0

DANMOH009

Router(config)#line aux 0 ^% Invalid input detected at '^' marker.I am also using Packet tarcer on this one

martell1000

try

line aux 0

martell1000

DANMOH009 wrote: »

Router(config)#line aux 0 ^% Invalid input detected at '^' marker.I am also using Packet tarcer on this one

aux 0 is not supported in pt

boredgamelad

Just opened up Packet Tracer--doesn't look like any of the routers have the option to configure the aux port. Probably not supported in Packet Tracer.

DANMOH009

Thanks guys