How to boot from Flash (If containing 2 Images)

controlcontrol Member Posts: 309
in CCNA & CCENT
Hi,

If I had 2 different IOS versions in the flash, how would you chose to boot from one over the other? (call them 1 & 2)
If booting from 1 and then I save the config. Would the same config be used if booting from IOS2?
· Share on FacebookShare on Twitter

Comments

  • fsanyeefsanyee Member Posts: 171
    boot system flash I]flash-fs[/I][COLOR=Black][B]:[/B][/COLOR I]partition-number[/I][COLOR=Black][B]:[/B][/COLOR I]filename[/I
    · Share on FacebookShare on Twitter
  • alxxalxx Member Posts: 755
    From my 3640 config


    boot system flash:c3640-telco-mz.124-23.bin


    !
    version 12.4
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    no service dhcp
    !
    hostname R8
    !
    boot-start-marker
    boot system flash:c3640-telco-mz.124-23.bin
    boot-end-marker
    !

    enable secret 5 $blahblahblah.
    !
    no aaa new-model
    !
    !
    ip cef
    !
    !
    !
    !
    !
    !
    !
    interface FastEthernet0/0
    ip address 192.168.1.201 255.255.255.0
    duplex auto
    speed auto
    !
    interface FastEthernet2/0
    no ip address
    shutdown
    duplex auto
    speed auto
    !
    interface FastEthernet2/1
    no ip address
    shutdown
    duplex auto
    speed auto
    !
    no ip http server
    ip forward-protocol nd
    !
    !
    !
    !
    !
    control-plane
    !
    !
    line con 0
    speed 9600
    line aux 0
    line vty 0 4
    login
    !
    end
    Goals CCNA by dec 2013, CCNP by end of 2014
    · Share on FacebookShare on Twitter
Sign In or Register to comment.