Options

ASDM hangs accessing IPS sensor

7of97of9 Member Posts: 76 ■■■□□□□□□□
in CCNP Security
I'm working on opening up a case with TAC, but figured I'd throw this up there in case anyone else has encountered it.

I am configuring a ASA-SSM-20 IPS sensor in an ASA 5520 HA pair. The IPS is running version 6.0.(6)E4 and the ASAs are running version 8.4(3) with ASDM version 6.4(7). I can access the IPS module via a session from the ASA, via SSH, or via an https connection to the IDM. However, if I try to connect to it via ASDM, ASDM crashes, just hangin with a status bar.

Is this just a code version compatibility issue? Has anyone seen this before?

Thanks!
Working on Security+ study, then going back to re-do my Cisco Certs, in between dodging moose and riding my Harley
· Share on FacebookShare on Twitter

Comments

  • Options
    7of97of9 Member Posts: 76 ■■■□□□□□□□
    I'll go ahead and answer my own question. This turned out to be a TAC case and a firmware upgrade on the IPS sensor resolved the issue. Even so, I'm finding the IDM a better resource for managing the IPS sensor than either the https tool or the ASDM interface.
    Working on Security+ study, then going back to re-do my Cisco Certs, in between dodging moose and riding my Harley
    · Share on FacebookShare on Twitter
  • Options
    nicklauscombsnicklauscombs Member Posts: 885
    IDM is the best way to manage the sensor after the initial configuration for sure.
    WIP: IPS exam
    · Share on FacebookShare on Twitter
Sign In or Register to comment.