Options
is this enough for ccna voice lab
ToddB
Member Posts: 149
1 of those ebay deals.
Routers:
1x WS-C3550PWR-XL-EN with 24x FastEthernet Ports and 2xGigabit Interfaces
Modules:
1x WIC-2T Serial Interface
1x NM-1FE2W Interface
IP Phones:
2x CP-7940G IP Phone
Routers:
1x CISCO3745 Router (2 FE Ports) 512D/128F IOS: c3745-adventerprisek9_sna-mz.124-15.T13.bin CallManager Express 4.3 installed
Switch: 1x WS-C3550PWR-XL-EN with 24x FastEthernet Ports and 2xGigabit Interfaces
Modules:
1x WIC-2T Serial Interface
1x NM-1FE2W Interface
IP Phones:
2x CP-7940G IP Phone
:thumbup:
Phil 4:6 "Be careful for nothing; but in every thing by prayer and supplication with thanksgiving let your requests be made known unto God."
Phil 4:6 "Be careful for nothing; but in every thing by prayer and supplication with thanksgiving let your requests be made known unto God."
Comments
-
Options
azaghul
Member Posts: 569 ■■■■□□□□□□
Other than CUCM/CUC/CUPS, that should do you fine. CUE would be a "nice to have", but still too expensive.
CME v4.1 is recommended for IOS 12.4(15)T, but in a lab environment you should be fine.