rip into ospf redistribution

Hello, I have two routers. Taupo router is running RIP version2. Huntly Router is running OSPF. They are both communicating using Frame Relay.
I want to redistribute RIP routes from Taupo into Huntly. I have attached my relevant running-config details for each router.
Can anyone please tell me where I am going wrong, as this is not working.
I have also attached an image of the network. The two routers I am talking about here are on the ones on the far right hand side.
Thanks for any help.

Taupo router:

router rip
version 2
redistribute ospf 43 metric 1
network 172.26.0.0
no auto-summary

Huntly Router:
router ospf 43
log-adjacency-changes
passive-interface FastEthernet0/0
passive-interface FastEthernet0/0.15
passive-interface FastEthernet0/0.25
passive-interface FastEthernet0/0.86
network 172.26.252.4 0.0.0.3 area 0
network 172.26.15.0 0.0.0.127 area 0
network 172.26.25.0 0.0.0.127 area 0
network 172.26.86.0 0.0.0.15 area 0
!
ip classless

net.jpg

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

fadhil

I think there is problem of how found wildcard mask,
please check it again.

macattacker

no, they are all OK. They are irrelevant actually. I am just wanting to bring the rip routes from Taupo into Huntly.

Does anyone have any ideas ?

georgemc

macattacker wrote: »

Hello, I have two routers. Taupo router is running RIP version2. Huntly Router is running OSPF. They are both communicating using Frame Relay.
I want to redistribute RIP routes from Taupo into Huntly. I have attached my relevant running-config details for each router.
Can anyone please tell me where I am going wrong, as this is not working.
I have also attached an image of the network. The two routers I am talking about here are on the ones on the far right hand side.
Thanks for any help.

Taupo router:

router rip
version 2
redistribute ospf 43 metric 1
network 172.26.0.0
no auto-summary

Huntly Router:
router ospf 43
log-adjacency-changes
passive-interface FastEthernet0/0
passive-interface FastEthernet0/0.15
passive-interface FastEthernet0/0.25
passive-interface FastEthernet0/0.86
network 172.26.252.4 0.0.0.3 area 0
network 172.26.15.0 0.0.0.127 area 0
network 172.26.25.0 0.0.0.127 area 0
network 172.26.86.0 0.0.0.15 area 0
!
ip classless

Your routers need to have at least one routing protocol in common. Try running RIP on Huntly and redistribute it into OSPF to accomplish your stated goal.

ayori

Make sure your Huntly and Taupo are OSPF neighbors then redistribute RIP over OSPF.

Sample command on Taupo once it has an OSPF neighbor relationship with Huntly:
router ospf 1
redistribute rip subnets