Got CME Working Partially

I have CME installed on a 1760 (c1700-ipvoicek9-mz.124-6.XT2.bin) with two IP phones. The 7960G is up and working using my DID from flowroute but the 7940G says TFTP timeout. I am in the early stages of learning this stuff so please bear with me. Any ideas why the 7940G is not coming up? From what it looks like in documentation the 7960G and the 7940G use the same load.

Comments

  • Legacy UserLegacy User Unregistered / Not Logged In Posts: 0 ■□□□□□□□□□
    Did you set option 150 to the ip address of the 1760? Do you have the load files on the router? Paste a sh run. Is the router configured as a tftp server already?
  • boostinbadgerboostinbadger Member Posts: 256
    Yes. Here is the config:



    5NINER1760CME#show conf
    Using 3398 out of 29688 bytes
    !
    ! Last configuration change at 23:15:07 EDT Tue Aug 21 2012 by boostinbadger
    ! NVRAM config last updated at 23:15:09 EDT Tue Aug 21 2012 by boostinbadger
    !
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname 5NINER1760CME
    !
    boot-start-marker
    boot-end-marker
    !
    enable secret 5 xxxxxxxx.
    !
    aaa new-model
    !
    aaa authentication login default local
    aaa authorization exec default local
    aaa authorization network default local
    !
    aaa session-id common
    !
    resource policy
    !
    clock timezone EST -5
    clock summer-time EDT recurring
    ip cef
    !
    no ip dhcp use vrf connected
    !
    ip dhcp pool VOICE-SCOPE
    network 10.159.1.0 255.255.255.248
    default-router 10.159.1.1
    dns-server 216.146.36.36
    option 150 ip 10.159.1.1
    !
    ip domain name 5NINER1760CME
    ip name-server 216.146.35.35
    ip name-server 216.146.36.36
    !
    voice service voip
    allow-connections sip to sip
    sip
    !
    voice class codec 1
    codec preference 1 g729r8
    codec preference 2 g711ulaw
    codec preference 3 g711alaw
    !
    voice register global
    !
    username boostinbadger privilege 15 secret 5 xxxxxxxx
    archive
    log config
    hidekeys
    !
    interface FastEthernet0/0
    no ip address
    speed 100
    !
    interface FastEthernet0/0.59
    description ROUTER INTERFACE FOR DATA VLAN
    encapsulation dot1Q 59 native
    ip address 10.59.1.4 255.255.255.224
    no snmp trap link-status
    !
    interface FastEthernet0/0.159
    description ROUTER INTERFACE FOR VOICE VLAN
    encapsulation dot1Q 159
    ip address 10.159.1.1 255.255.255.248
    no snmp trap link-status
    !
    interface FastEthernet0/1
    switchport access vlan 59
    !
    interface FastEthernet0/2
    switchport access vlan 59
    !
    interface FastEthernet0/3
    switchport access vlan 159
    !
    interface FastEthernet0/4
    switchport access vlan 159
    !
    interface Vlan1
    no ip address
    shutdown
    !
    interface Vlan59
    no ip address
    no autostate
    !
    interface Vlan159
    no ip address
    no autostate
    !
    ip default-gateway 10.59.1.1
    ip route 0.0.0.0 0.0.0.0 10.59.1.1
    !
    ip http server
    ip http authentication local
    no ip http secure-server
    !
    control-plane
    !
    dial-peer voice 1 voip
    destination-pattern 1[2-9]..[2-9]......
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.flowroute.com
    dtmf-relay sip-notify
    !
    sip-ua
    credentials username xxxxxxxx passwordxxxxxxxx realm sip.flowroute.com
    calling-info pstn-to-sip from number set xxxxxxxxxxx
    no remote-party-id
    registrar dns:sip.flowroute.com expires 3600
    !
    telephony-service
    max-ephones 2
    max-dn 2
    ip source-address 10.159.1.1 port 2000
    auto assign 1 to 2
    create cnf-files version-stamp 7960 Aug 21 2012 22:34:12
    dialplan-pattern 1 xxxxxxx... extension-length 4
    max-conferences 4 gain -6
    transfer-system full-consult
    !
    ephone-dn 1
    number 5901
    label Basement
    name Basement
    !
    ephone-dn 2
    number 5902
    !
    ephone 1
    mac-address 0016.C815.5A6D
    type 7960
    button 1:1
    !
    ephone 2
    !
    line con 0
    exec-timeout 5 0
    password 7 xxxxxxxx
    logging synchronous
    stopbits 1
    line aux 0
    line vty 0 4
    exec-timeout 30 0
    password 7 xxxxxxxx
    logging synchronous
    line vty 5 15
    exec-timeout 30 0
    password 7 xxxxxxxx
    logging synchronous
    !
    ntp clock-period 17180256
    ntp server 198.82.1.201 key 0 prefer
    ntp server 198.82.1.202 key 0
    end
  • boostinbadgerboostinbadger Member Posts: 256
    I downloaded the latest loads for the 7960-7940 for CME 4.0....and now both phones are up. However, I have now lost outbound calling.
Sign In or Register to comment.