Question about InterVlan

i have here a topology I made because I'm curious if I can manage to ping
the result it failed
PC0 to PC2 =VLAN 10 =Failed
PC1 to PC3 = VLAN 20= Failed

PC0 to PC1 and PC4 = Successful
PC0 to PC6= Successful
PC1 to PC6 = Successful
Pc4 to PC2 and PC3 = Successful

PC2 to PC3 and PC6 = Successful
PC2 to PC4= Successful
PC3 to PC4 = Successful
Pc6 to PC0 and PC1 = Successful

by the way I use OSPF for the connection of the two routers
my question is how can I able to ping PC0 to PC2 and PC1 to PC3
(can i able to ping the PC's using intervlan on different network?)
Thanks !

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

huafist

We need your running-configs from both routers and switches to even make an assumption of the issue.

kambalpogi

R1 config
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
spanning-tree mode pvst
!
!
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 193.33.50.1 255.255.255.0
!
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 195.23.30.1 255.255.255.0
!
interface FastEthernet0/1
ip address 172.20.3.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/1/0
ip address 192.168.20.1 255.255.255.252
clock rate 64000
!
interface Serial0/1/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 192.168.20.1 0.0.0.0 area 0
network 195.23.30.0 0.0.0.255 area 0
network 172.20.3.0 0.0.0.255 area 0
network 193.33.50.0 0.0.0.255 area 0

R2

interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address 197.22.55.1 255.255.255.0
!
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 196.22.30.1 255.255.255.0
!
interface FastEthernet0/1
ip address 199.20.1.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/1/0
ip address 192.168.20.2 255.255.255.252
!
interface Serial0/1/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 12
log-adjacency-changes
!
router ospf 1
log-adjacency-changes
network 192.168.20.2 0.0.0.0 area 0
network 197.22.55.0 0.0.0.255 area 0
network 199.20.1.0 0.0.0.255 area 0
network 196.22.30.0 0.0.0.255 area 0

SW0
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport mode trunk
!
interface FastEthernet0/2
switchport access vlan 10
switchport mode access
!
interface FastEthernet0/3
switchport access vlan 20
switchport mode access

SW1
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport mode trunk
!
interface FastEthernet0/2
switchport access vlan 10
switchport mode access
!
interface FastEthernet0/3
switchport access vlan 20
switchport mode access

networker050184

Did you create the VLANs on the switch? Make sure they are actually in the VLAN database and forwarding.

Other than that I'd check default gateways on the PCs and stuff like that. Config looks decent to me.

huafist

the first thing that sticks out to me is you're advertising the IP addresses of your serial links as networks instead of the network 192.168.0.0 0.0.0.3.

networker050184

That doesn't matter one bit and is actually a preferred method for a lot of networks. It keeps it straight forward and you can know exactly what interface by the exact IP.

Remember, the network command has no impact on what mask is advertised. All the network command does is specify what interface participates in OSPF (or EIGRP etc). Once the interface is participating in the process, the mask configured on the interface is what is used to determine what is advertised.

kambalpogi

Thanks to your inputs sir
I created the vlans on each switch and I'm just wondering If I can ping the PC's to the other side of the network even it is configured as a InterVlan

networker050184

Yes you can ping them if everything is set up correctly. Is this still not working? Can you ping the first hop router? The router on the other side? What is the PC gateway set to?

mtehonica

My first thought was a problem with the default route... would you need the default-information originate command issued under your ospf process? Also, can you do a show ip route from the routers to give a little more info?

networker050184

Why would a default route be needed? All networks should be known via OSPF.

kambalpogi

Sir thanks a lot I able to ping all the PC's !

mapletune

kambalpogi wrote: »

Sir thanks a lot I able to ping all the PC's !

So... PC gateway problem?

kambalpogi

I use Packet Tracer for the simulation when I try to use the GUI for ping it fails
but when I tried to use cmd on each PC all the PC's ping

vishaw1986

networker050184 Made good replies ....

Ltat42a

kambalpogi wrote: »

I use Packet Tracer for the simulation when I try to use the GUI for ping it fails
but when I tried to use cmd on each PC all the PC's ping

Try using the GUI ping more than once. I've had times where it took 2-3 times for the ping to be successful.

hth