Post Your Lab (PICS)
Comments
-
Roguetadhg
Member Posts: 2,489 ■■■■■■■■□□
I'm trying to buy the switches first, as I practically told myself I wouldn't progress until I bought switches. I have 2 more to go, then I'll feel "okay" to continue beyond CCNA:R+S
Until then, I'm building myself a small 3-computer case. I spent a couple hours wandering walmart and LOWES to find something capable, yet small and light.
I just cut out the backports using the trusty dremel + diamond wheel. Liquid plastic is a bit hot. I also drilled the LED holes. I'll need to buy Caulk as mine turned solid![:\](https://community.infosecinstitute.com/resources/emoji/confused.png ":\")
. Note it's not all professional-looking because I didn't take the time / never did this before / working in my office.
Im thinking of not cutting slots for the PCI riser cards. I don't plan on doing anything that it would need the riser. I might just to make sure I have a backup if a NIC dies.
I'll need to wire a ATX splitter. I plan on having the Powersupply External. To save weight. Just air cooled. These aren't being Overclocked, or anything like that. It's just to generate cheap network traffic without taxing my limping working computer
In order to succeed, your desire for success should be greater than your fear of failure.
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams -
staticz
Member Posts: 54 ■■□□□□□□□□
Gathered all the lab supplies today. 3 2950g 48 port switches, 1 3750G 24 port, and a HP DV7800 with 8GB of RAM. The PC is running GNS3 on Ubuntu 12.04 64-bit and has 4 NICs. Pretty fun way to spend a Friday at work!
And in case you are wondering what wouldn't have been as fun of a Friday...here is my office -
-
TehToG
Member Posts: 194
Roguetadhg wrote: »Until then, I'm building myself a small 3-computer case. I spent a couple hours wandering walmart and LOWES to find something capable, yet small and light.
Wouldn't filling a decent pc full of intel ethernet cards and running ESXi on it not be a better option? That way you could generate alot more computers worth of traffic. -
Roguetadhg
Member Posts: 2,489 ■■■■■■■■□□
Yes, doing that would be a better option. But I was looking for a cheap solution. 3 PCs is more than enough to do some low-key stuff. I had the computers, just need to do a few things to make it work!In order to succeed, your desire for success should be greater than your fear of failure.
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams -
krjay
Member Posts: 290
Gathered all the lab supplies today. 3 2950g 48 port switches, 1 3750G 24 port, and a HP DV7800 with 8GB of RAM. The PC is running GNS3 on Ubuntu 12.04 64-bit and has 4 NICs. Pretty fun way to spend a Friday at work!
Nice setup, minus the diablo 3 box.. That game was a waste of $602014 Certification Goals: 70-410 [ ] CCNA:S [ ] Linux+ [ ] -
Roguetadhg
Member Posts: 2,489 ■■■■■■■■□□
Sad and true.
I was just speaking with a steam buddy. He just got Borderlands 2. He said its a lot better, a lot smoother. Torchlight is supposed to be the Diablo 3 we wanted :P
I enjoyed Borderlands 1, but I still have that need for a top-down RPG. I have to apologize to my soul for buying the Collector's Edition of D3
I'll probably revisit D3 in a year. I stopped playing after I realized that I was farming for gold for the Auction house - not for the loot.In order to succeed, your desire for success should be greater than your fear of failure.
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams -
oli356
Member Posts: 364
I totally regret buying my lab now Especially as I just spent loads on my console server.
There's dozens of 3550s/3750s at work and plenty of routers I can just use to build a lab there and connect them to a console server... Lab:
Combination of GNS3 and Cisco equipment if required. -
jdballinger
Member Posts: 252
That console server shouldn't have run you more than $60 or $70 on eBay. You didn't buy it brand new, did you? -
oli356
Member Posts: 364
It was $60, but I had to pay $60 for shipping (to the UK) and then another uhmm $35 for import tax. Regret it now. Oh well!Lab:
Combination of GNS3 and Cisco equipment if required. -
jdballinger
Member Posts: 252
That sucks having to pay that much for shipping and import, but it still beats the $1200 or so it costs new! Plus you can always sell it on eBay and recoup at least SOME of the money.
At least this way you always know that you have unfettered access to a solid Cisco lab that you can use for your studies. I would never want to rely on work or someone else for that sort of thing. Chin up!
-
saspro
Member Posts: 114
It was $60, but I had to pay $60 for shipping (to the UK) and then another uhmm $35 for import tax. Regret it now. Oh well!
If you're selling it I could be interested -
Roguetadhg
Member Posts: 2,489 ■■■■■■■■□□
If it works, toss up some pictures, and tell people it's for sale. Or what's for sale. You may want to keep things, sell as a whole bundle, etc...In order to succeed, your desire for success should be greater than your fear of failure.
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams -
oli356
Member Posts: 364
Going to speak to one of the guys and see if I get the lab into the network so I can access it from home. If I can, I will probably sell mine Lab:
Combination of GNS3 and Cisco equipment if required. -
TehToG
Member Posts: 194
This is as good a place as any to ask. I have a 3 x 2600 router setup. I've only got 2 x Wic-1s though so i can only have a single serial connection. Is it possible to do frame relay over ethernet instead?
-
Legacy User
Unregistered / Not Logged In Posts: 0 ■■□□□□□□□□
Get a 2520 to act as your frame relay switch you can find them for $50 on ebay. No my friend frame relay is done over some sort of serial connection.
-
TehToG
Member Posts: 194
There are none on ebay uk for less than £30 (that's what a 2621XM would go for), I don't have a pile of cash to throw at it at the minute.
-
Legacy User
Unregistered / Not Logged In Posts: 0 ■■□□□□□□□□
You can get frame relay setup on packet tracer or gns3 depending on what you have available.
-
jdballinger
Member Posts: 252
Thought I'd throw my rack up here, since it's the one that got me through CCNA (and will get me through CCNP in the future hopefully!)
Top to bottom:
-Tripp-Lite 12 outlet PDU
- Catalyst 2950T x2 (I love this switch)
- Catalyst WS-C3550-24PWR-SMI running EMI image
- Catalyst WS-C3550-48
- Cisco 2620 w/WIC-2T
- Cisco 2621 w/NM-8A/S, for Frame-Relay
- Cisco 2620xm x3 w/WIC-2T cards
-
JustFred
Member Posts: 678 ■■■□□□□□□□
Nice [h=2]"After a time, you may find that having is not so pleasing a thing, after all, as wanting. It is not logical, but it is often true." Spock[/h] -
mapletune
Member Posts: 316
hopefully, ill be getting a 3550 and a 3750 soon =p
pics when they arrive.Studying: vmware, CompTIA Linux+, Storage+ or EMCISA
Future: CCNP, CCIE -
Blowindoe
Member Posts: 15 ■□□□□□□□□□
Awesome labs everyone! I will be posting mine later on in the day
-
vanquish23
Member Posts: 224
Roguetadhg wrote: »I'm trying to buy the switches first, as I practically told myself I wouldn't progress until I bought switches. I have 2 more to go, then I'll feel "okay" to continue beyond CCNA:R+S
Until then, I'm building myself a small 3-computer case. I spent a couple hours wandering walmart and LOWES to find something capable, yet small and light.
I just cut out the backports using the trusty dremel + diamond wheel. Liquid plastic is a bit hot. I also drilled the LED holes. I'll need to buy Caulk as mine turned solid. Note it's not all professional-looking because I didn't take the time / never did this before / working in my office.
Im thinking of not cutting slots for the PCI riser cards. I don't plan on doing anything that it would need the riser. I might just to make sure I have a backup if a NIC dies.
I'll need to wire a ATX splitter. I plan on having the Powersupply External. To save weight. Just air cooled. These aren't being Overclocked, or anything like that. It's just to generate cheap network traffic without taxing my limping working computer
Very interresting setup there with the plastic drawer. I remember doing computer mods back in the early 2000's. Let me know how this turns out. Did you mount and raise the motherboards?He who SYNs is of the devil, for the devil has SYN'ed and ACK'ed from the beginning. For this purpose, that the ACK might destroy the works of the devil. -
mapletune
Member Posts: 316
So this arrived today...
=( and it wouldn't boot... like... not even a sign of power flowing through =(
i was really really disappointed.
Oh well, the seller said I could drop it off and test 1 more 3750 they have for sale, and if not, they'll refund me.
But yea, still very disappointed that this doesn't work. I was looking forwards for a gigabit switch, soo excited...
----
On that note, I finally understand why 3560 switches are more expensive than 3750 and 3750G. It's because the collective IT community has had a really bad experience with these 3750's and failures and RMA's etc. The 3560's, which are basically the same switch but don't have stackwise, have had a much more reliable history.
just FYI for people considering 3550, 3560, 3750'sStudying: vmware, CompTIA Linux+, Storage+ or EMCISA
Future: CCNP, CCIE -
oli356
Member Posts: 364
jdballinger wrote: »That sucks having to pay that much for shipping and import, but it still beats the $1200 or so it costs new! Plus you can always sell it on eBay and recoup at least SOME of the money.
At least this way you always know that you have unfettered access to a solid Cisco lab that you can use for your studies. I would never want to rely on work or someone else for that sort of thing. Chin up!
Well I saw one of my colleagues lab earlier for his CCIE, he has about 30-45 routers and 20 switches or so, I couldn't be bothered to count. It fills up two 42U racks
Using works equipment makes sense Got the all clear to go ahead with it so I will be moving mine on.#
Maple, any reason you wanted a gigabit switch? If your just using it for studying why does it matter. Shame that it doesn't work though. Interesting to know that it's cheaper though. I was stood in front of a 42U rack full of them earlier Lab:
Combination of GNS3 and Cisco equipment if required. -
Roguetadhg
Member Posts: 2,489 ■■■■■■■■□□
That sucks Maple, You going to go with a 3650 then?
Im not sure of the price difference between the 37xx and 36xx though.In order to succeed, your desire for success should be greater than your fear of failure.
TE Threads: How to study for the CCENT/CCNA, Introduction to Cisco Exams -
radix
Member Posts: 34 ■■□□□□□□□□
So this arrived today...
=( and it wouldn't boot... like... not even a sign of power flowing through =(
i was really really disappointed.
Oh well, the seller said I could drop it off and test 1 more 3750 they have for sale, and if not, they'll refund me.
But yea, still very disappointed that this doesn't work. I was looking forwards for a gigabit switch, soo excited...
ahh sad to hear that... but now I'm really nervous for my switches haven't tested them out yet its been with the shipping agency for 2 months nowIf you ain't pissed off for greatness that means you're okay with being mediocre
_________________________________________________________________
Studying CCNA -
pitviper
Member Posts: 1,376 ■■■■■■■□□□
So this arrived today...
=( and it wouldn't boot... like... not even a sign of power flowing through =(
i was really really disappointed.
Good luck with the replacement - oddly enough, the ONLY DOA gear that I've ever received have all been switches (mostly PoE),CCNP:Collaboration, CCNP:R&S, CCNA:S, CCNA:V, CCNA, CCENT -
MAC_Addy
Member Posts: 1,740 ■■■■□□□□□□
Likewise for me, too. We had a bunch of 3560's arrive (20, I think) 2 of them were DOA. Though, their warranty replacement is extremely fast!2017 Certification Goals:
CCNP R/S -
Carl_S_901
Member Posts: 105
Just got a new rack to replace the old Onstage 12U rack and got everything loaded. Finally looks respectable enough to post a picture.
Also added the Cyber-Power PDU today which makes the power cords much less of a mess.