adding sip ip addresses and ports from sip provider
I have a crap load of ip address provided by the sip provider. For sip 5060 udp/tcp, sip tls tcp 5061, media 1024-65355. In the docs they stated to get the incoming working I have to allow those ports/ip address on my firewall or nat. I wondered how does everyone define those. I created new port maps for the 3 protocols and added them to a class policy from outzone -> inzone source ip to my gateway ip. Doesn't seem to be working should I create another acl for each one ip access permit (sip ip add) 5060 (gateway ip add ) 5060 and place the ip nat inside in the gateway interface. I get the call sending an invite going out to the sip server but don't get any session or ringing on the incoming in the debug.