Having weird issues on my router

I was wondering about something about my router. Every time this router boots up it goes through a whole sequence and gives me a fresh start to configure this router. It doesn't save any changes i put into it. here I posted a txt file giving the boot sequence.

System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: Support and Documentation
Copyright (c) 2001 by cisco Systems, Inc.


Testing lower main memory - data equals address
Testing lower main memory - checkerboard
Testing lower main memory - inverse checkerboard
Clearing lower 4K memory for cache initialization
Clearing bss
Reading monitor variables from NVRAM
Enabling interrupts
Enabling instruction cache
Reading cookie
Initializing main memory
Sizing NVRAM
Sizing flash
Exiting init
C1700 platform with 32768 Kbytes of main memory


program load complete, entry point: 0x80008000, size: 0x40e6c4
Stack pointer : 0x02000000
monstack : 0x8000648C
monra : 0x00000000
edata : 0x8000C3FC
magic : 0xFEEDFACE
memsize : 0x02000000
uncomp_size : 0x00A9B754
comp_size : 0x0040A2B4
comp_checksum : 0x1377D200
uncomp_checksum : 0x5CA53686
Self decompressing the image :


################################################################################### [OK]
Source elf_hdr->e_shnum = 0x00000009
Setting up to copy ELF section 0x00000001
to image_info section 0x00000000
sh_name = 0x0000001B
sh_type = 0x00000001
sh_flags = 0x00000007
sh_addr = 0x80008000
sh_offset = 0x00000060
sh_size = 0x007D0744
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000020
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000002
to image_info section 0x00000001
sh_name = 0x00000021
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x807D8744
sh_offset = 0x007D07A4
sh_size = 0x00211375
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000003
to image_info section 0x00000002
sh_name = 0x00000029
sh_type = 0x00000001
sh_flags = 0x00000002
sh_addr = 0x809E9AB9
sh_offset = 0x009E1B19
sh_size = 0x00000003
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000004
sh_entsize = 0x00000000
Setting up to copy ELF section 0x00000004
to image_info section 0x00000003
sh_name = 0x00000031
sh_type = 0x00000001
sh_flags = 0x00000003
sh_addr = 0x809E9ABC
sh_offset = 0x009E1B1C
sh_size = 0x000B9A80
sh_link = 0x00000000
sh_info = 0x00000000
sh_addralign = 0x00000008
sh_entsize = 0x00000000
cpu type : 0x00000033
uncomp_size : 0x00A9B754
monstack : 0x8000648C


image_info.entry_point = 0x80008000
image_info.section_count = 0x00000004
image_info.monstack = 0x8000648C
image_info.monra = 0x00000000
image_info.param0 = 0x00000002
image_info.param1 = 0x00000000
image_info.param2 = 0x00000000
image_info.param3 = 0x00000000
Section Index = 0x00000000
source = 0x800349E8
dest = 0x80008000
bytes = 0x007D0744
Section Index = 0x00000001
source = 0x8080512C
dest = 0x807D8744
bytes = 0x00211375
Section Index = 0x00000002
source = 0x80A164A1
dest = 0x809E9AB9
bytes = 0x00000003
Section Index = 0x00000003
source = 0x80A164A4
dest = 0x809E9ABC
bytes = 0x000B9A80


Restricted Rights Legend


Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.


cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706






Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(4)YB, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(6.T2
TAC Support: Support and Documentation
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 15-Mar-02 20:32 by ealyon
Image text-base: 0x80008124, data-base: 0x807D8744


cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes of memory.
Processor board ID FOC07080Z6U (3931155922), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)




--- System Configuration Dialog ---


Would you like to enter the initial configuration dialog? [yes/no]: