Options
Cisco 1760 Max Flash
Hondabuff
Member Posts: 667 ■■■□□□□□□□
Whats the largest flash you can fit into a 1760 Router. Im finding the 32mb being to small for a good IOS and CME file set.
“The problem with quotes on the Internet is that you can’t always be sure of their authenticity.” ~Abraham Lincoln
Comments
-
Options
azaghul
Member Posts: 569 ■■■■□□□□□□
64Mb is the max flash for a 1760. I've done it in 48Mb, but could probably squeeze it down to 32Mb if really pressed. After the IOS, the biggest hogs are the more modern IP phones. Dropping 797x, 794[125] and 796[125] makes the big difference. -
OptionsHondabuff
Member Posts: 667 ■■■□□□□□□□
Did you start with the cme-basic file and just build up from there?“The problem with quotes on the Internet is that you can’t always be sure of their authenticity.” ~Abraham Lincoln
-
Optionsazaghul
Member Posts: 569 ■■■■□□□□□□
Start with cme-basic, cme-gui, moh.au and a limited selection of ring tones (you'll also need to edit the ringlist.xml and distinctive-ringlist.xml or you'll get an error when they load, learnt from experience there
...oops) then only add the ip phone packages required.
I usually package it all in a new tar file and call it cme-lite for later re-use.