taking 640-801 full exam in 3 weeks and cant sleep at night

thanks for the advice on hardware got 3 routers and 2 switches to work with
trying every lab in the cisco academy program except isdn
i can subnet and vlsm in my head as well as port numbers and bin to dec to hex
does anyone have any other ideas to help ????
i have....
2501 router
2521 router
2610 router
2924xl switch
3016 switch
i cant do router on a stick to route vlans but did that in college
can you set access-lists on a sub-interface too ?????
any ideas welcome thanks ................

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

mikej412

ukmw wrote:

i cant do router on a stick to route vlans

Is that because of the switch? There is a 12.x IOS version that should let you do router-on-a-stick with the 10Mbps interface on the 2610.

Try and take a nap at lunch time to make up for those sleepless nights.

I did a screen print of the ISDN configuration graphic from the Academy Courseware, and found that useful for study and review (my academy didn't have an ISDN simulator).

ukmw

yes i was led to believe you needed a fast ethernet port on a 2620 to route between vlans ????
do you know what version can do it on a 10mbps????
thank you

mikej412

ukmw wrote:

do you know what version can do it on a 10mbps????

About the best I can do is change the 12.x to maybe a 12.2(x) or greater version.

I had been under the same impression that fast ethernet was a requirement for router on a stick from the Network Academy Courseware...

I did a quick search on Cisco, but the answer didn't jump out. If you have a 12.2 or > version, it might just be quicker to try a sub-interface on the ethernet port and see if it lets you do the encapsulation.

Or maybe someone else here has a 2610 and can confirm (or deny).

wildfire

I can confirm you can do this on a 2610/12 since 12.2T and beyond. I beleive ( I cant confirm because I cant find the notice any longer) that you need the S (plus) option to do this.

I have a 2612 and a 2610 running 12.2(23) IK9o3S and 802.11Q is supported on the ethernet subinterface.

ukmw

if i can use dot1q encapsulation on my sub-interfaces on my 2610 with the newest possible ios hopefully it will work ?????
does anyone know how much to upgrade the ios ??????