Voice: Help - HWIC-4ESW + ILPM + PWR unit but phone not lighting up

rchaserchase Member Posts: 126
BR1#show inv
NAME: "2821 chassis", DESCR: "2821 chassis"
PID: CISCO2821 , VID: V06 , SN: FTX1408AJ2Z

NAME: "WAN Interface Card - Serial (1T) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - Serial (1T)"
PID: WIC-1T= , VID: 1.0, SN: 2296xxxx

NAME: "One port T1 voice interface daughtercard on Slot 0 SubSlot 1", DESCR: "One port T1 voice interface daughtercard"
PID: VWIC-1MFT-T1 , VID: V02, SN: 3664xxxx

NAME: "4 Port FE Switch on Slot 0 SubSlot 2", DESCR: "4 Port FE Switch"
PID: HWIC-4ESW , VID: V01 , SN: FOC14153xxx

NAME: "WIC/VIC/HWIC 2 Power Daughter Card", DESCR: "4-Port HWIC-ESW Power Daughter Card"
PID: 800-IL-PM-2 , VID: V01 , SN: FOC14416xxx

NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64 , VID: V01 , SN: FOC104xxxxx



So I originally purchased the HWIC-4ESW, then learned I need a PWR unit and ILPM. bought both of those, plugged the ILPM daughter card into the HWIC, swapped the old PWR unit, connected the new one to the motherboard, but still phone doesnt light up. Any ideas?

Comments

Sign In or Register to comment.