cisco switch & routers

akosidarakosidar Registered Users Posts: 2 ■□□□□□□□□□
Hi All,

Need help on configuring a switch and router. Having problems with the command lines.
  • enable password
  • console password
  • MOTD set up
  • how can I ensure no ip domain-lookup
Thank you so much,
D.

Comments

  • bwillfordbwillford Member Posts: 64 ■■■□□□□□□□
    Take it you didnt look around much?

    >enable
    (takes you to privileged exec mode)
    configure terminal
    enable secret blahblahblah
    line console 0
    password bblahblah
    login
    exit
    banner motd *blahblahblah*
    no ip domain-lookup
  • astorrsastorrs Member Posts: 3,139 ■■■■■■□□□□
    bwillford wrote: »
    Take it you didnt look around much?
    Sounds like a school assignment...
  • Hatch1921Hatch1921 Member Posts: 257 ■■■■□□□□□□
    astorrs wrote: »
    Sounds like a school assignment...
    LOL I was thinking the same thing :)
  • akosidarakosidar Registered Users Posts: 2 ■□□□□□□□□□
    Thank you so much!

    Please don't get me wrong on this. I'am really trying hard to learn about all this.

    Practice 1:
    Given a network with 3 Routers plus 2 Switches that goes side by side and PC's on both ends using 200.2.5.0/24.
    need to know..
    how many collision domains?
    how many broadcast domains (no VLANS)?
    do I need to rob bits?
    what is the new subnet mask?
    what are the host ranges on each subnet?
    what is the broadcast address?
    Thanks,
    D.
  • oli356oli356 Member Posts: 364
    Surely if you were trying to learn it you would be studying these BASIC networking fundamentals and not asking us :p
    Lab:
    Combination of GNS3 and Cisco equipment if required.
  • Ltat42aLtat42a Member Posts: 587 ■■■□□□□□□□
    akosidar wrote: »
    how can I ensure no ip domain-lookup

    At this prompt, type "end" (without the quotes), then press enter

    Router>
  • mgmguy1mgmguy1 Member Posts: 485 ■■■■□□□□□□
    Get Packet Tracker and do the commands. When I hit a router or switch I can do the following without having to think about it

    Create a new hostname
    enable secret
    motd set up
    no ip-domain lookup
    service password-encryption command
    line con 0 set up including exec-timeout command
    line vty setup up including exec-timeout command
    configuring an IP on an interface.
    putting a description on interface.

    These are simple commands you can pound out. Find some free labs and just follow the directions. You'll be a pro in no time.
    "A lot of fellows nowadays have a B.A., M.D., or Ph.D. Unfortunately, they don't have a J.O.B."

    Fats Domino
  • goldenlightgoldenlight Member Posts: 378 ■■□□□□□□□□
    Google Danscourses. He has awesome videos that will help clear up any issues you are having.

    Also using the ? mark after a command helps you learn the commands pretty easy
    The Only way to do great work is to love what you do. If you haven't found it keep looking. Don't settle - Steve Jobs
  • XyroXyro Member Posts: 623
    akosidar wrote: »
    Thank you so much!

    Please don't get me wrong on this. I'am really trying hard to learn about all this.

    Practice 1:
    Given a network with 3 Routers plus 2 Switches that goes side by side and PC's on both ends using 200.2.5.0/24.
    need to know..
    how many collision domains?
    how many broadcast domains (no VLANS)?
    do I need to rob bits?
    what is the new subnet mask?
    what are the host ranges on each subnet?
    what is the broadcast address?
    Thanks,
    D.

    Yes, definitely a homework assignment lol.
Sign In or Register to comment.