Options
IRQ Numbers
gone2toyko
Member Posts: 9 ■□□□□□□□□□
in A+
Hey all,
I am trying to find a list of the typical IRQ number that devices use, in order to study for the A+ core exam. In my A+ books, they only show what goes on ports 0-7
0-system clock
1-keyboard
2-reserved (used to route 9-15)
3-Com 2 (and 4)
4-Com 1 (and 3)
5-LPT2
6-Floppy Disk Controller
7-LPT1
8-15 I have no idea!
The reason I asking for this information is because my book offers 0-7, but alot of my measureup questions and other quizes ask for 9-15
(Ex- "Which IRQ port does the Math Co-Processer use?")
I figured that I could just jump into my Device Manager to view the IRQ's in the "View by resource" view. The only problem with that is that it is my system only. On one site it shows IRQ 10 as the NIC, and on mine it's my SMBus.
If anyone has any type of table showing a list of each IRQ port with the devices that correspond to it... I would be ever so greatful!
R.O
I am trying to find a list of the typical IRQ number that devices use, in order to study for the A+ core exam. In my A+ books, they only show what goes on ports 0-7
0-system clock
1-keyboard
2-reserved (used to route 9-15)
3-Com 2 (and 4)
4-Com 1 (and 3)
5-LPT2
6-Floppy Disk Controller
7-LPT1
8-15 I have no idea!
The reason I asking for this information is because my book offers 0-7, but alot of my measureup questions and other quizes ask for 9-15
(Ex- "Which IRQ port does the Math Co-Processer use?")
I figured that I could just jump into my Device Manager to view the IRQ's in the "View by resource" view. The only problem with that is that it is my system only. On one site it shows IRQ 10 as the NIC, and on mine it's my SMBus.
If anyone has any type of table showing a list of each IRQ port with the devices that correspond to it... I would be ever so greatful!
R.O
Comments
-
Optionsgone2toyko
Member Posts: 9 ■□□□□□□□□□
Wow,
not even a minute after posting this I found a pretty decent guide.
If anyone else would liek to see it, it can be viewed at:
http://www.pcguide.com/ref/mbsys/res/irq/num.htm
Sorry bout that!
-
Options
Plantwiz
Mod Posts: 5,057 Mod
Plantwiz
_____
"Grammar and spelling aren't everything, but this is a forum, not a chat room. You have plenty of time to spell out the word "you", and look just a little bit smarter." by Phaideaux
***I'll add you can Capitalize the word 'I' to show a little respect for yourself too.
'i' before 'e' except after 'c'.... weird? -
Optionsgone2toyko
Member Posts: 9 ■□□□□□□□□□
bah! I got 13/20. I didn't know any of the DMA questions! I haven't studied them yet. I studied the i/o addresses in full hex.... didn't know I just needed to know the first 3 charactors!!!!
-
Optionstaz_55
Member Posts: 11 ■□□□□□□□□□
http://ranfo.com/WQ11.html
Ranfo Interrupt Request Memory Drill
try this it helped me tons. just keep doing it till you get 100 percent three time in a role and youll remember them no problem.you only live once.
