Will this 3560 and IOS work for CCNP?

amcloneamclone Member Posts: 31 ■■□□□□□□□□
Will this 3560 and IOS be sufficient for my CCNP studies? Will I have to upgrade the IOS? Thank You

SW1>show version
Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 18:15 by nachen
Image text-base: 0x00003000, data-base: 0x01100000


ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWARE (fc4)


SW1 uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c3560-ipbase-mz.122-35.SE5/c3560-ipbase-mz.122-35.SE5.bin"


cisco WS-C3560-24TS (PowerPC405) processor (revision E0) with 122880K/8184K bytes of memory.
Processor board ID FDO1147Y1Y7
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
Working on CCNP Switch.

Comments

  • QHaloQHalo Member Posts: 1,488
    Use the Cisco Feature Navigator and compare that image to the exam topics and feature sets. You could also check the versions used in the CCIE R&S lab and see what they are using as that would more than cover anything taught in the CCNP. Keep researching, you'll figure it out.

    Edit: don't forget to do some searching here on the forums. There are a few threads about it as well.
  • amcloneamclone Member Posts: 31 ■■□□□□□□□□
    QHalo, thank you for the fast reply. I figured that someone with experience could quickly glance at the IOS version and be able to immediately tell me if this switch would suffice. I did perform a search and did not find anything on this exact IOS. I also understand that I could have easily went to Cisco's website and spent an hour or two going through the feature sets. But why waste all of that time when someone probably already has the answer?

    Isn't the whole point of a forum / message board to collaborate?

    Thanks again
    Working on CCNP Switch.
  • QHaloQHalo Member Posts: 1,488
    I don't consider it a waste of time, but here you go anyway...

    This should be sufficient to cover your needs.

    How To Build A CCIE Rack | INE


    SW1
    3560-24TS-E
    12.2(44)SE
    EMI
    c3560-advipservicesk9-mz.122-44.SE.bin


    SW2
    3560-24TS-E
    12.2(44)SE
    EMI
    c3560-advipservicesk9-mz.122-44.SE.bin




  • amcloneamclone Member Posts: 31 ■■□□□□□□□□
    I agree.. It would not have been a waste of time. I could have said that better. Thank you for your help. It is greatly appreciated.
    Working on CCNP Switch.
Sign In or Register to comment.