Debug to verify telco is receiving call?
phoeneous
Member Posts: 2,333 ■■■■■■■□□□
Turning up a new pri with an h323 gateway. Basically mimicked config of an identical working production 2911. When I attempt outbound calling I get what sounds like a telco generated message 'you are unable to place this call'. Debug voip ccapi inout shows:
Disconnect cause 16 is supposedly normal call clearing.
Is there a debug that I can use to determine if the telco is accepting call? Still new to voice
002840: Apr 29 18:35:46.954 CDT: //68/00F05A7D0F00/CCAPI/cc_api_call_disconnect_done: Disposition=0, Interface=0x32F9D0AC, Tag=0x0, Call Id=68, Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
Disconnect cause 16 is supposedly normal call clearing.
Is there a debug that I can use to determine if the telco is accepting call? Still new to voice
Comments
-
shodown
Member Posts: 2,271
yes it is.
Debug ISDN q931.Currently Reading
CUCM SRND 9x/10, UCCX SRND 10x, QOS SRND, SIP Trunking Guide, anything contact center related -
networker050184
Mod Posts: 11,962 Mod
Debug ISDN q931.
Used to be my favorite command. Many days spent staring at that out put along with ccsip.An expert is a man who has made all the mistakes which can be made. -
phoeneous
Member Posts: 2,333 ■■■■■■■□□□
I'm learning a lot from that command! I really enjoy voice despite what most people say. It's fun
