Options
ICND1 ( 640-822) Booked for 28th June
dazl1212
Member Posts: 377
in CCNA & CCENT
Passed the N+ about a month ago with a decent score so this seems like the next logical step. I am halfway through the CCENT for dummies book. Then intend to read through the relevant parts of Lammles CCNA 7th edition book. Plus labbing labbing labbing on Packet Tracer and subnetting practicing, I'm down to about 60 seconds on the Cisco learning network subnetting quiz. I have read through the Dummies book around a year ago and did a fair amount of labbing. So hopefully I have plenty of time if I get my head down
Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]
Comments
-
OptionsMichael2 Member Posts: 305 ■■■□□□□□□□The 640 series expires in September. You should cancel the 640-822 and take the new 100 series. Odom already has a book out for it.
-
OptionsNytrocide Member Posts: 225Should have plenty of time with 5 months remaining.Goals for 2014: CCNA: Voice / CCNA: Security
-
Optionsdazl1212 Member Posts: 377I already have a bit of material for the 640 series. I'm hoping i have enough time to get both done. If not I will just take the 100 series.
I would rather not have to rely on Odoms book as I find his style of writing hard to readGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
Optionsdazl1212 Member Posts: 377How good a gauge is subnettingquestions.com and the "CCNA subnet quiz" on here on ready my subnetting is up to par for the ICND1?Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]
-
Optionscoffeeluvr Member Posts: 734 ■■■■■□□□□□How good a gauge is subnettingquestions.com and the "CCNA subnet quiz" on here on ready my subnetting is up to par for the ICND1?
Both are great practice for the exam."Something feels funny, I must be thinking too hard. - Pooh" -
OptionsDakinggamer87 Member Posts: 4,016 ■■■■■■■■□□I'm also a fan of Todd Lammle's CCNA study guide book I find it more enjoyable and easier to read. I found subnettingquestions.com to be a good source for practice in addition to practice tests from the book.*Associate's of Applied Sciences degree in Information Technology-Network Systems Administration
*Bachelor's of Science: Information Technology - Security, Master's of Science: Information Technology - Management
Matthew 6:33 - "Seek the Kingdom of God above all else, and live righteously, and he will give you everything you need."
Certs/Business Licenses In Progress: AWS Solutions Architect, Series 6, Series 63 -
Optionsdazl1212 Member Posts: 377Cheers lads I'll keep plugging away and get my time down.Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]
-
OptionsMaster Of Puppets Member Posts: 1,210Good luck!Yes, I am a criminal. My crime is that of curiosity. My crime is that of judging people by what they say and think, not what they look like. My crime is that of outsmarting you, something that you will never forgive me for.
-
Optionsdazl1212 Member Posts: 377Thank you
I did some labbing yesterday and playing about with the help commands, watching a pdu go between to routers and being successful was ace
According to the official subnetting quiz I am averaging around 60 seconds although I keep getting distracted
I asked this question in the subnetting thread if anyone can answer that would be great;
Say you have a 192.168.1.0 network 255.255.255.192 and you subnet it could you not use say 192.168.1.16 as the network address?
I'm 99% sure its a no but I just want to double check.
It is the only thing I am not sure of.Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
OptionsCerebro Member Posts: 108Isn't the block size 64? So the network add is .0 and .64, the usable hosts are .1-.622014 goals: ICND2[]
-
Optionsdazl1212 Member Posts: 377Yes it is. My question is can you only use say 0, 64, 128, 192 as the network address.
I'm pretty sure you can. You couldnt use say 17 - 80 as the address range?Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
Optionsjamesp1983 Member Posts: 2,475 ■■■■□□□□□□Good luck! You got this."Check both the destination and return path when a route fails." "Switches create a network. Routers connect networks."
-
Optionsdazl1212 Member Posts: 377Thank you! I feel much more confident this time!Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]
-
OptionsRouteMyPacket Member Posts: 1,104Yes it is. My question is can you only use say 0, 64, 128, 192 as the network address.
I'm pretty sure you can. You couldnt use say 17 - 80 as the address range?
/26 = block size of 64
0 - 63
64 - 127
128 - 191
192 - 255
Network Addresses being 0, 64, 128, 192 so you are correct! Broadcasts being 63, 127, 191, 255
You will get to the point where you see 255.255.255.192 and immediately know it's a /26 and block size of 64. The next thing will be to identify the difference between 255.255.255.192 and 255.255.192.0
I always liked to write down from /30 to /16 on a paper and stick it up where it can be referenced. It definitely will speed things up especially in testing scenarios.
/30 255.255.255.252 4 addresses
/29 255.255.255.248 8 addresses
/28 255.255.255.240 16 addresses
/27 255.255.255.224 32 addresses
/26 255.255.255.192 64 addresses
Something like that posted up will really help you with memorization.Modularity and Design Simplicity:
Think of the 2:00 a.m. test—if you were awakened in the
middle of the night because of a network problem and had to figure out the
traffic flows in your network while you were half asleep, could you do it? -
Optionsdazl1212 Member Posts: 377This is an excellent post. I have started writing;
128/64/32/16/8/4/2/1
and 1/2/4/8/16/32..... and so on to help me with the powers of 2.
I might do that in the exam before it starts if you are allowed.
I knew it was but I sometimes have a habit of second guessing myselfGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
OptionsRouteMyPacket Member Posts: 1,104This is an excellent post. I have started writing;
128/64/32/16/8/4/2/1
and 1/2/4/8/16/32..... and so on to help me with the powers of 2.
I might do that in the exam before it starts if you are allowed.
I knew it was but I sometimes have a habit of second guessing myself
Exactly, write it down during the tutorials. I have done that several times with no issues. I say do it so you don't have to worry about second guessing yourself in a testing situation.Modularity and Design Simplicity:
Think of the 2:00 a.m. test—if you were awakened in the
middle of the night because of a network problem and had to figure out the
traffic flows in your network while you were half asleep, could you do it? -
Optionsjamthat Member Posts: 304 ■■■□□□□□□□You have plenty of time to write down some notes before the exam on the sheets they provide you. The amount of info I put into my subnetting reference tables is ridiculous, but allows me to get the info I need for any subnetting question very quickly without having to worry about making an error in my head
I also write down common ports and (for the ICND2) am planning to write various things like acl/nat statement syntax, etc just so I don't accidentally get any of that confused for some reason. -
Optionsdazl1212 Member Posts: 377Great stuff. I saw a subnet table a while ago someone posted on here actually. Might see if I can find it.Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]
-
OptionsNytrocide Member Posts: 225You have plenty of time to write down some notes before the exam on the sheets they provide you. The amount of info I put into my subnetting reference tables is ridiculous, but allows me to get the info I need for any subnetting question very quickly without having to worry about making an error in my head
I also write down common ports and (for the ICND2) am planning to write various things like acl/nat statement syntax, etc just so I don't accidentally get any of that confused for some reason.
Could you possibly tell us exactly what you wrote?Goals for 2014: CCNA: Voice / CCNA: Security -
Optionsdazl1212 Member Posts: 377Didn't think it was worth doing another thread for it...
I was doing a lab in Packet tracer and it required me to put in a enable password and an enable secret.
I put the pass as mypass and the secret as mysecret.
Tried to log in with the secret and it failed. Tried multiple times and I couldn't log in.
Tried the mypass even though it shouldn't work and it didn't. Thinking I may have put the secret in wrong I reset the router and did it again and it still didn't work.
Is it a fault with PT? I spent ages messing about in PT last night for various reasons and didn't get much actual studying done. May avoid PT for the rest of today, things too addictiveGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
Optionsairben Member Posts: 14 ■■■□□□□□□□Great stuff. I saw a subnet table a while ago someone posted on here actually. Might see if I can find it.
-
Optionsdazl1212 Member Posts: 377Thats great that thanksGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]
-
Optionsdazl1212 Member Posts: 377Here's a little table I wrote up I have been using for subnetting practice and it helps.
128/64 /32 /16 /8 /4/ 2 / 1
128/192/224/240/248/252/254
11111111-8-11111111-16-1111111-24-1111111-32
1-2-4-8-16-32-64-128 etc, etc
Kind of panicking a little now as I've had to lab along with the book my studies have slowed a hell of a lot now.
I cant read a load of commands without doing them as it doesn't sink in.
I really don't want to mix and match exams if possibleGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
Optionsdazl1212 Member Posts: 377Sorry for multiple posting but I didnt think it was worthy of a new thread
I am just over half way through the CCENT for Dummies book.
I took the Pearson exam that comes with odoms book and got 700.
Am I on track for the exam?Goals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
Optionsdazl1212 Member Posts: 377I have had to put it back till the 2nd of August as I dont feel I am ready.
I only pass half of the practice exams and I flunk the exam engine bundled with the Cisco press bookGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ] -
Optionssuperhuman05 Registered Users Posts: 3 ■□□□□□□□□□6-20 for me. I'm doing the 100 series. It should be interesting. I'm still wondering if I should have studied for the 640 series.
-
OptionsSounds Good Member Posts: 403superhuman05 wrote: »6-20 for me. I'm doing the 100 series. It should be interesting. I'm still wondering if I should have studied for the 640 series.
What are the differences between the series? Say I get 640-802, does that mean that after it's retired I won't be able to get CCNA:flavors without completing CCENT first?On the plate: AWS Solutions Architect - Professional
Scheduled for: Unscheduled
Studying with: Linux Academy, aws docs -
Optionsdazl1212 Member Posts: 377I think they basically took some subjects from the ICND2 and put them in the ICND1.
I'm going to have to mix and match it isnt ideal but its still a CCNAGoals for 2013 Network+ [x] ICND1 [x] ICND2 [ ]