Can't ssh to SW1

binaryhat

I setup a small network in PT and I can't ssh to SW1 or ping it. Username is kyle, password is k1.

Index of /Other/PT

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

networker050184

What have you tried to fix it? What do you think could be causing the issue?

binaryhat

I tried changing the ip address and set a default gateway. No luck.

theodoxa

1) The switch was on a different subnet (192.168.5.0/24) than the PCs or router (192.168.1.0/24). I changed the IP Address of VLAN 1 to 192.168.1.254/24.

2) Confgured Default Gateway is incorrect. I Changed Configured Default Gateway to 192.168.1.1 (Fa0/0 on Router0)

3) Under Line Configuration for the vty lines, you had the "login" command, but no password command. You had a local user account "kyle", so I just changed the command to "login local" so that you could login with that account.

PC is now able to SSH to SW1

binaryhat

theodoxa wrote: »

1) The switch was on a different subnet (192.168.5.0/24) than the PCs or router (192.168.1.0/24). I changed the IP Address of VLAN 1 to 192.168.1.254/24.

2) Confgured Default Gateway is incorrect. I Changed Configured Default Gateway to 192.168.1.1 (Fa0/0 on Router0)

3) Under Line Configuration for the vty lines, you had the "login" command, but no password command. You had a local user account "kyle", so I just changed the command to "login local" so that you could login with that account.

PC is now able to SSH to SW1

Thanks for the input. Fixed it