Passed ICND2 today

Passed with a 958
Didnt do too well in the WAN and i dunno why, wish i could get the questions i missed to look on

Configure, verify and troubleshoot a switch with VLANs and interswitch communications 100%

Implement an IP addressing scheme and IP services to meet network requirements in a medium-size Enterprise 100%

Configure and troubleshoot basic operations and routing on Cisco devices 93%

Implement, verify, and troubleshoot NAT and ACLs in a medium size Enterprise branch office Network 100%

Implement and verify WAN links 67%

Did better on my NAT and ACL than i thought i would

What next ?
Thinking about the JNCIA-Junos then CCDA

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

WilyOne

Very nice, 'gratz!

Kinet1c

Nice! Same score I got last month. Best of luck with your next cert.

NicWhite

Congrats!!!!

Master Of Puppets

Congrats! How much experience do you have and what is the direction you are looking to go into? I'm asking because the design stuff is usually saved for when you have some experience under your belt.

DAVIS NGUYEN

Congrats on the pass

FloOz

Congrats and goodluck on your next goal!

coffeeluvr

Congratulations on the pass!!

dsgm

Master Of Puppets wrote: »

Congrats! How much experience do you have and what is the direction you are looking to go into? I'm asking because the design stuff is usually saved for when you have some experience under your belt.

I was actually for some advise on this, dont have much experience, do you suggest i go the Junos way, was interested in juniper to have info on both certs to diversify my options on my resume.

Hoping to get a job soon to get the experience under my belt, then go towards my ccda then ccnp

Master Of Puppets

If you have an interest towards Juniper, you can only benefit from getting some knowledge on it + the cert. There are a lot of juniper devices out there so you can become more appealing to employers. Also, it shows you are not stuck in a one vendor environment. Although once you understand how things work and have a strong grasp on the concepts, you won't have much trouble picking up any vendor. Cisco are very effective at teaching those concepts.

IMO, in your case, it would be better to wait for the design track. It is a great one, very interesting and just plain awesome. However, it is not something that you start with right off the bat. I know where you come from - it is exciting and you want to learn it and start as soon as possible. Network design is something you really start getting into once you know how the network works and you have at least 1-2 years of experience administrating and troubleshooting it. It is required that you understand the different flows of traffic, protocols, issues that can arise with them etc. I would advise you to go for CCDA and CCDP after your CCNP:R&S and not any time sooner. This is how you will get the most of it and really advance. No need to rush. What's more, you will find the CCDA a lot easier after doing CCNP.

I think your top priority right now should be to get your foot through the door and start gaining experience.

dsgm

Thanks for the advice

Yes i a do have an interest in juniper and did think it would make me more appealing to employers
Thanks again i will start on my JNCIA journey and continue looking for work opportunities

Tyb

Congratulations on the pass!!

Dakinggamer87

Congrats on pass!!

Good luck on your next cert