CIPC with SIP
zobo88
Member Posts: 60 ■■□□□□□□□□
I am running CME on GNS3 and have CIPC communicating with CME on SKINNY
I want to change this to SIP, can someone give some pointers to make this change?
GNS3 is running Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version 12.4(7)
I want to change this to SIP, can someone give some pointers to make this change?
GNS3 is running Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version 12.4(7)
ephone-1 Mac:0200.4C4F.4F50 TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 15 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 IP:192.168.2.101 58780 CIPC keepalive 69 max_line 8 button 1: dn 1 number 8888 CH1 IDLE CH2 IDLE
Comments
-
zobo88
Member Posts: 60 ■■□□□□□□□□
reading more suff, it seems that I need to configre
voice register global
in the router, however this option is not accepted by IOS in gnsCME(config)#voice register global
^
% Invalid input detected at '^' marker. -
ehnde
Member Posts: 1,103
I'm just learning this stuff too, and going to be using mostly just GNS3. You might want to take a look at this: blindhog.net » How to build a voice lab with GNS3 and VMWareClimb a mountain, tell no one.