Static route

zimskizzimskiz Member Posts: 98 ■■□□□□□□□□
Hello,

I have the following question : If you have " ip route 10.10.10.0 255.255.255.0 1.1.1.2 " ( int Vlan 10 1.1.1.1/30 - with .1 on vlan 10 and .2 on the client side ), what Default Gateway will put the client on a host if he wants to use 10.10.10.0/24 class, and also do you still have for that /24 subnet and broadcast address ?

I have this particulary scenario everyday at work. My answer will be : for /24 i will put default gateway 1.1.1.1, and for broadcast/subnet address i didn't find an idea.

How about you guys ?

Comments

  • networker050184networker050184 Mod Posts: 11,962 Mod
    Can you clarify your question? I really don't understand what you are asking here.
    An expert is a man who has made all the mistakes which can be made.
  • zimskizzimskiz Member Posts: 98 ■■□□□□□□□□
    Let's make it simple by givining you an output :

    Current configuration : 349 bytes
    !
    interface Vlan10
    description client
    ip address 1.1.1.1 255.255.255.252
    !
    ip route 10.10.10.0 255.255.255.0 1.1.1.2

    Assuming that you need to use 10.10.10.0/24 for your company pc's, how the client IP configuration will look like ?

    IP; 10.10.10.123
    Mask : 255.255.255.0
    Default gateway : 10.10.10.1 or 1.1.1.1 or 1.1.1.2 ? ( here is the problem )

    I've make myself clear ?
  • gorebrushgorebrush Member Posts: 2,743 ■■■■■■■□□□
    Well, I think it's fairly obvious that a PC in the 10.x.x.x network will use 10.10.10.1 as a gateway.

    In fact, I am very surprised that someone with your level of certification even have to ask this question.
  • zimskizzimskiz Member Posts: 98 ■■□□□□□□□□
    I had an arque with a senior collegue and i had to ask on a public forum.
  • lincis_auslincis_aus Member Posts: 50 ■■■□□□□□□□
    Sounds to me like someone dumped their CCNA and CCNP exams...
  • gorebrushgorebrush Member Posts: 2,743 ■■■■■■■□□□
    I have to agree.
  • d4nz1gd4nz1g Member Posts: 464
    lincis_aus wrote: »
    Sounds to me like someone dumped their CCNA and CCNP exams...

    Indeed.

    @OP

    Shame on you, lol.
  • d4nz1gd4nz1g Member Posts: 464
    zimskiz wrote: »
    Let's make it simple by givining you an output :

    Current configuration : 349 bytes
    !
    interface Vlan10
    description client
    ip address 1.1.1.1 255.255.255.252
    !
    ip route 10.10.10.0 255.255.255.0 1.1.1.2

    Assuming that you need to use 10.10.10.0/24 for your company pc's, how the client IP configuration will look like ?

    IP; 10.10.10.123
    Mask : 255.255.255.0
    Default gateway : 10.10.10.1 or 1.1.1.1 or 1.1.1.2 ? ( here is the problem )

    I've make myself clear ?

    What kind of CCNA have you taken?
    Don't you know that the default gateway SHOULD be on the same subnet as your clients'?
Sign In or Register to comment.