Telnet/SSH from different interface vlans

M1S0M1S0 Member Posts: 41 ■■□□□□□□□□

hi

VLAN 5 Switch
172.16.4.0 /25
255.255.255.128


VLAN 10 Left Pc
172.16.4.128 /25
255.255.255.128


VLAN 15 Right Pc
172.16.5.0 /25
255.255.255.128

if I have the following vlans , is there a way to telnet/ssh to the switch from VLAN 10 and VLAN 15 , the

switch is configure
interface vlan 5
ip address 172.16.4.20 255.255.255.128

but I cannot ping it and when I add the following configuration I can ping it

interface vlan 10 and
ip address 172.16.4.129 255.255.255.224

interface vlan 15
ip address 172.16.5.1 255.255.255.224

Comments

  • discobiscuitsdiscobiscuits Member Posts: 9 ■□□□□□□□□□
    believe you need some routing
  • M1S0M1S0 Member Posts: 41 ■■□□□□□□□□
    more specific please
  • networker050184networker050184 Mod Posts: 11,962 Mod
    Do you have a default gateway set on your switch?
    An expert is a man who has made all the mistakes which can be made.
  • MatroMatro Member Posts: 38 ■■□□□□□□□□
    Like discobiscuits, I think you should route packets with a router or layer3 switch.
    Actually: CCNA - Palo Alto ACE
  • M1S0M1S0 Member Posts: 41 ■■□□□□□□□□
    I have default gateway but not sure if is the correct one
    ip default-gateway 172.16.4.1
  • networker050184networker050184 Mod Posts: 11,962 Mod
    What about your hosts? Do they have the correct DG set?
    An expert is a man who has made all the mistakes which can be made.
Sign In or Register to comment.