Options
CCNP Route Topology
Hi All,
Is anyone aware of an official Cisco topology for the ROUTE exam? I have reviewed the exam blueprint but have found nothing relating to topologies. I would like to build something ROUTE worthy in GNS3 so I can lab/study. Does anyone have any suggestions?
Is anyone aware of an official Cisco topology for the ROUTE exam? I have reviewed the exam blueprint but have found nothing relating to topologies. I would like to build something ROUTE worthy in GNS3 so I can lab/study. Does anyone have any suggestions?
Comments
-
Options
networker050184
Mod Posts: 11,962 Mod
No there is not an official topology for the ROUTE exam. It's not like TSHOOT where you will be working issues on a single topology. There could be sims covering any number of topologies.An expert is a man who has made all the mistakes which can be made. -
Options
OfWolfAndMan
Member Posts: 923 ■■■■□□□□□□
I am using the Lab Manual for ROUTE (Along with the 101 labs for CCNP in the Simplified series). As said above, there is no official topology.:study:Reading: Lab Books, Ansible Documentation, Python Cookbook 2018 Goals: More Ansible/Python work for Automation, IPSpace Automation Course [X], Build Jenkins Framework for Network Automation [] -
Options
keenon
Member Posts: 1,922 ■■■■□□□□□□
you can use 3 to 5 routers and 2 switches. you should be able to test most everything eigrp, bgp, ospf, mcast(not really included but you will want to), ipv6 and redistribution, etcBecome the stainless steel sharp knife in a drawer full of rusty spoons -
Options
ande0255
Banned Posts: 1,178
It appears that there are a few regular topologies 3 routers, 2 L3 switches, and 1 L2 switch in the v6.0 lab manual on cisco's website which can be viewed / downloaded in this link:
https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/10184-102-1-37275/CCNP%20ROUTE%206.0%20SLM.pdf;jsessionid=0C0CEB7144F07B8A2B7FD89D307B8F65.node0
Hope this helps, I'll be joining you folks with CCNP R/S studies following the VCP