Interface IP Address Question

Super99Super99 Member Posts: 274
I'm new to the Cisco world.
Would I be correct to say that if one does a show ip route that a /32 would be the IP of an interface?
I've attached pic, hopefully it worked.

Thanks.

Comments

  • EdTheLadEdTheLad Member Posts: 2,111 ■■■■□□□□□□
    No, a /32 could be a locally configured static route or a routed learned via a routing protocol. The "C" and "L" along with "directly connected" tell you that it's an interface address. If you configured a static route pointing at a local interface, it would show up as "directly connected" but it would have an "S" indicating static route rather than the "L" or "C".
    Networking, sometimes i love it, mostly i hate it.Its all about the $$$$
  • Dieg0MDieg0M Member Posts: 861
    In this case the /32 is a Local Host route (seen by the L) and the IP of an interface. As Ed said, a /32 is not always a host route and could also be a Connected interface, static route or route from another protocol.
    Follow my CCDE journey at www.routingnull0.com
  • Super99Super99 Member Posts: 274
    So if I'm understanding this correctly.
    Example:
    C 10.1.1.192/27 is directly connected, fa 2/0
    L 10.1.1.193/32 is directly connected, fa 2/0
    Means that this router is directly connected to the network 10.1.1.192/27 and can be reached via 10.1.1.193/32
  • mikeybinecmikeybinec Member Posts: 484 ■■■□□□□□□□
    Yeah that will work.. The club or gang (subnet or network ID) that you belong to is the /27 address. You, the member is identified by the /32 address. That's my analogy.

    icon_cheers.gif
    Cisco NetAcad Cuyamaca College
    A.S. LAN Management 2010 Grossmont College
    B.S. I.T. Management 2013 National University
Sign In or Register to comment.