Options
Connect a real switch into GNS3
Whistlestop
Member Posts: 20 ■□□□□□□□□□
in CCNP
I have read a few guides on this but to be honest I'm not too sure what would be the best way to do it given my setup. I have read about buying expensive quad nics, raspberry pi, using a console server.
I have one 2950 switch (cisco) which I want to connect into GNS3 and then connect up virtual routers to it. Eventually I intend to get a couple more switches such as 3950s
My PC is running windows 7 pro and I have one NIC which is on the motherboard
What are the best options do i have and how would I do it to connect my real switch(s) into GNS3?
Thank you.
I have one 2950 switch (cisco) which I want to connect into GNS3 and then connect up virtual routers to it. Eventually I intend to get a couple more switches such as 3950s
My PC is running windows 7 pro and I have one NIC which is on the motherboard
What are the best options do i have and how would I do it to connect my real switch(s) into GNS3?
Thank you.
Comments
-
Options
phoeneous
Member Posts: 2,333 ■■■■■■■□□□
Best is relative. Do you plan to use your pc's nic for something else? -
Options
inscom.brigade
Member Posts: 400 ■■■□□□□□□□
I learned years ago from this YouTube. I have shared this through the years with others & they usually say that it did the trick for them.
https://www.youtube.com/watch?v=wC-n8Jy88dY -
Options
OfWolfAndMan
Member Posts: 923 ■■■■□□□□□□
Make sure your NIC supports 802.1q tagging. It should show up on the manufacturer's website if it does.:study:Reading: Lab Books, Ansible Documentation, Python Cookbook 2018 Goals: More Ansible/Python work for Automation, IPSpace Automation Course [X], Build Jenkins Framework for Network Automation []