a little crisis on my 2924

I bought this 2924 from ebay. cann't see ios ver in "sh ver"(why?) but I can see when it's powered up the file name, so I add "boot system c2900......." then reload. I got "switch:" prompt.

by reference on the internet, I re-powered the switch while holding "mode" button. I rename the "config.text", then "switch:boot". problem still.

I can see the file(as below), but how to get rid of the "permission" thingy?

switch: dir flash:
Directory of flash:/

2 -rwx 854721 <date> c2900XL-h-mz-112.8-SA2
3 -rwx 60680 <date> c2900XL-diag-mz-112.8-SA2
4 drwx 4288 <date> html
72 -rwx 1097 <date> config.old
73 -rwx 156 <date> env_vars

434688 bytes available (1293312 bytes used)
switch: boot c2900XL-h-mz-112.8-SA2
Loading "c2900XL-h-mz-112.8-SA2"...c2900XL-h-mz-112.8-SA2: permission denied

Error loading "c2900XL-h-mz-112.8-SA2"

Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

david_r

madonion,

Try this:

BOOT flash:c2900XL-h-mz-112.8-SA2

instead of

BOOT c2900XL-h-mz-112.8-SA2

Your switch should say, Loading "flash:filename" and not Loading "filename"

the_return_of_the_Ring

got it done. thanks! bud.