CCNA 640-801 exam tomorrow!!

Well, just seemed like yesterday when I told everyone that i booked this in a week ago.

Well tomorrow is the big day...

I feel very confident and really want to nail this exam. Just 1 question... in the Sims can i use the "?" command at all??

Like if i want to look at all the ospf show commands and stuff, can i do
"show ip ospf ?"

And do "debug" commands work too?

Or is it not allowed, what about using "TAB" to finish commands??
I am not relying on it to work, but just thought i'd ask.

Thanks

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

!30

First , Good Luck !
Second , don't panic & try to focus

Third when I took my CCNA almost an year ago I coulden't use "?" or "tab" but I understand that it differs from your test center .

But for me , don't even try to put your mind in this , just repeat once more .

Tomorrow is the big day , wait to hearing from you : owned CCNA !

vixer

You can do it!!!

PremierCisco

Just wanted to say best of luck tommorow.

You can get this.

Are you taking it in Sydney, if so where?

Regards

Eamonn

Danman32

You can use ? and tab, but I haven't seen in Cisco official statements on how far you can ?. I didn't waste time trying to find out.

Testing center shouldn't matter, but version of the test for different countries might.

Webmaster

www.techexams.net/forums/viewtopic.php?t=7268

Good luck tomorrow!

unwritt3n

Thanks alot guys!!

Im in my CCNP NetAcad class at the moment. Only 2 hours til exam time!! Hope all goes well!

keenon

subnet, subnet, subnet

techED

how was the test?

mikej412

unwritt3n wrote:

Im in my CCNP NetAcad class at the moment. Only 2 hours til exam time!!

You're only half paying attention to your class and going over your notes, right?

Good Luck!

Don't forget your time management during the exam.

unwritt3n

GOOD NEWS GUYS!!!

I pass today!!!

961/1000

Damn, that was hard, but i did spend the last 3 weeks, 8 hours a day pretty much studyin. So it did pay off!!

Wanna thank alot of ppl here who helped me with some questions!!

This was my report:

Technolgy 85%
Planning and Design 100%
Implementation 100%
Troubleshooting 94%

To study i did the NetAcad for 2 years, then studyin in the last month using Sybex CCNA edt 5 and CNAP online content. As well as NetLab for labs, and goin to my NetAcad class to use the equipment.

Now im studying CCNP 1 and CCSP 1 at the same time.

So see you in the CCNP/SP forums now.

Time to party!

darwinism

Awesome man, congrats.

Danman32

Terrific score! Congrats!

mikej412

unwritt3n wrote:

I pass today!!!

Congratulations!

Definitely fit some celebration time in between those classes!

JVE

That is great. I take mine on Saturday! I been watching the Train Signal and Nuggets videos as well as reading the books and that is helping a lot!!! I am ready

unwritt3n

From my exam... I would suggest!!

Be prepared for Sims!! I got damn 4, and my first 2 questions were sims which i was not expecting.

I gotta lots of drag and drop.. main topics i got tested on were:

VLANs, ACLs, Frame Relay

!30

seem's that CCNA become's a little harder than last year ...

unwritt3n

I was very suprised to see no subnetting questions in my exam... besides the initial planning in some of the sims where u gotta work out subnets, i didnt get any questions that related to just finding a host in a range, or finding a directed broadcast address within a subnet....

I thought this was strange as i was told by many to be prepared to do lots of questions like this.

But i did get hammered with ACLs, and wildcard masks

JVE

Well i am doing great at subnetting and I think i got the ACL's nailed as well. Frame Relay should be no problem, and I think i do good on Vlans. I am not an expert with OSPF so i hope there is not a lot on that one.

My main thing is to get this test behind me so I can move to start studying for CCNP. This site has been a great help!