Options
Frame Relay Question
I have a lab set up with 3 routers, over a frame relay cloud. I enabled loopback interfaces on all 3 routers and turn on rip version 2. Nothing passes over the frame to send the updates. I run a debug and I see everything being fowarded to the loopback interfaces which is to say it goes no where. I have broadcast enabled on my frame map statements. Do I need to do something else on here to make it work? Thanks
Comments
-
Options
wildfire
Member Posts: 654
Have you enabled rip only on the loopback of on the frame sub interfaces also? can you ping across your DLCIs? how about you post your configs on here and we shall see what we can do?Looking for CCIE lab study partnerts, in the UK or Online. -
OptionsJVE
Member Posts: 76 ■■□□□□□□□□
R1
interface Serial1/0
ip address 172.12.123.1 255.255.255.0
encapsulation frame-relay
serial restart-delay 0
frame-relay map ip 172.12.123.3 103 broadcast
frame-relay map ip 172.12.123.2 102 broadcast
no frame-relay inverse-arp
!
router rip
version 2
network 1.0.0.0
network 172.12.0.0
no auto-summary
R2
interface Serial1/0
ip address 172.12.123.2 255.255.255.0
encapsulation frame-relay
serial restart-delay 0
frame-relay map ip 172.12.123.3 203 broadcast
frame-relay map ip 172.12.123.1 201 broadcast
no frame-relay inverse-arp
!
router rip
version 2
network 2.0.0.0
network 172.12.0.0
no auto-summary
You may notice, i only posted the configs of R1 and R2, as I figured that would be enough to troubleshoot with. If that is not enough, let me know. Also, realize I have a loopback interface on each router, as stated earlier and the debug shows below:
R1#debug ip rip
RIP protocol debugging is on
R1#
Aug 26 14:08:08.235: RIP: sending v2 update to 224.0.0.9 via Loopback0 (1.1.1.1)
Aug 26 14:08:08.235: RIP: build update entries - suppressing null update -
OptionsJVE
Member Posts: 76 ■■□□□□□□□□
I figured it out my friends, thanks for your help!! You the man. Or am I the man? Anyway, you made me take a second look at my config, got it! Thanks buddy