MPLS L3 VPN -- stupid problem i belive

I cannot find the reason why i can't redistribute bgp into ospf. The main concern is for 1.1.1.1/32.


R5 config :


RP/0/0/CPU0:R5#sh run
Sat Aug 8 21:12:52.904 UTC
Building configuration...
!! IOS XR Configuration 5.3.1
!! Last configuration change at Sat Aug 8 21:08:05 2015 by cisco
!
hostname R5
vrf Cust_R56
address-family ipv4 unicast
import route-target
1:111
!
export route-target
56:6
!
!
!
interface Loopback5
description peer_de_bgp
ipv4 address 192.168.0.5 255.255.255.255
!
interface MgmtEth0/0/CPU0/0
shutdown
!
interface GigabitEthernet0/0/0/0
description to_R4_
ipv4 address 192.168.45.1 255.255.255.252
!
interface GigabitEthernet0/0/0/1
description to_R6
vrf Cust_R56
ipv4 address 10.5.6.5 255.255.255.0
!
route-policy PASS
pass
end-policy
!
router ospf 1
passive enable
area 0.0.0.0
interface Loopback5
passive disable
!
interface GigabitEthernet0/0/0/0
passive disable
!
!
!
router ospf 56
redistribute bgp 1 route-policy PASS
redistribute bgp 12302
address-family ipv4 unicast
vrf Cust_R56
redistribute bgp 1 route-policy PASS
redistribute bgp 12302
address-family ipv4 unicast
area 0.0.0.0
interface GigabitEthernet0/0/0/1
!
!
!
!
router bgp 12302
address-family ipv4 unicast
!
address-family vpnv4 unicast
!
neighbor 192.168.0.2
remote-as 12302
update-source Loopback5
address-family vpnv4 unicast
route-policy PASS in
route-policy PASS out
!
!
!
mpls oam
!
mpls ldp
interface GigabitEthernet0/0/0/0
!
!
end

ALSO

RP/0/0/CPU0:R5#sh bgp vpnv4 uni nei 192.168.0.2 routes
Sat Aug 8 21:14:09.379 UTC
BGP router identifier 192.168.0.5, local AS number 12302
BGP generic scan interval 60 secs
Non-stop routing is enabled
BGP table state: Active
Table ID: 0x0 RD version: 0
BGP main routing table version 11
BGP NSR Initial initsync version 1 (Reached)
BGP NSR/ISSU Sync-Group versions 0/0
BGP scan interval 60 secs


Status codes: s suppressed, d damped, h history, * valid, > best
i - internal, r RIB-failure, S stale, N Nexthop-discard
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 1:111
*>i1.1.1.1/32 192.168.0.2 0 100 0 1 i
*>i10.2.1.0/24 192.168.0.2 0 100 0 1 ?


Processed 2 prefixes, 2 paths
RP/0/0/CPU0:R5#



R6 config :

RP/0/0/CPU0:R6#sh run
Sat Aug 8 21:13:28.253 UTC
Building configuration...
!! IOS XR Configuration 5.3.1
!! Last configuration change at Sat Aug 8 17:37:02 2015 by cisco
!
hostname R6
interface Loopback6
ipv4 address 6.6.6.6 255.255.255.255
!
interface MgmtEth0/0/CPU0/0
shutdown
!
interface GigabitEthernet0/0/0/0
description to_R5
ipv4 address 10.5.6.6 255.255.255.0
!
router ospf 100
area 0.0.0.0
interface Loopback6
!
interface GigabitEthernet0/0/0/0
!
!
!
end



Any ideas?