Need help on a CCNA assignment

ZerkiiZerkii Posts: 3Registered Users ■□□□□□□□□□
e3a47ef46e00af4093754ee66a943f9cb656ba53251d63ed94c96c59b8e9941c

Hey I am having trouble on the first part of this assignment (Part a). Keep in mind I will need to make this network in packet tracer. So far I have found these 2 subnets for 10.0.0.0 /8
1st subnet
10.0.0.0 /22
10.0.3.255 /22
2nd subnet
10.0.4.0 /22
10.0.7.255 /22
However, the next part says i need to not only make subnets for the buildings but the point-point link on the router as well. I am a bit confused what I am suppose to do here. I believe I need to make 2 subnets for the buildings again but, I'm not sure what ip address I would use for the point-point. Would I use any ip address in the 2 subnets or do i need to use a network address. From my understanding point-point would mean the serial ports that connect the routers together.

Thanks in advance for any help!

Comments

Sign In or Register to comment.