Eigrp

gaby_978gaby_978 Posts: 222Member
Hey guys

I am unable to configure EIGRP between a 2600 and a 2513 series router. The 2600 takes all the EIGRP configs fine. The 2500 take all the configs while you are configuring EGIRP but once done and I run a sh run, no EIGRP configs appear. Had this issue before when i had my lab firs setup and had to run OSPF instead. Any suggestions?????

Thanks
‎"If you spend too much time thinking about a thing,
you'll never get it done"

Comments

  • gaby_978gaby_978 Posts: 222Member
    Here is the sh ver

    bbrtr3#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) 3000 Software (IGS-DR-L), Version 11.1(17), RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-1998 by cisco Systems, Inc.
    Compiled Tue 27-Jan-98 12:41 by phester
    Image text-base: 0x03030DD0, data-base: 0x00001000

    ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
    ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

    bbrtr3 uptime is 1 hour, 32 minutes
    System restarted by power-on
    System image file is "flash:igs-dr-l.111-17", booted via flash
    ‎"If you spend too much time thinking about a thing,
    you'll never get it done"
  • kalebkspkalebksp Posts: 1,033Member
    That is a very old IOS, my suggestion would be to get a more recent IOS and see if it works properly.
    Contradictions do not exist. Whenever you think you are facing a contradiction, check your premises. You will find that one of them is wrong.
    -Ayn Rand

    vCabbage
  • gaby_978gaby_978 Posts: 222Member
    I know but at this time I dont have access to a newer IOS
    ‎"If you spend too much time thinking about a thing,
    you'll never get it done"
  • Bl8ckr0uterBl8ckr0uter Posts: 5,031Inactive Imported Users
    gaby_978 wrote: »
    I know but at this time I dont have access to a newer IOS

    It should work. EIGRP is supported by 11.X. How are you configuring EIGRP? More importantly why are you configuring eigrp? Can you use another routing protocol?
  • eleguaelegua Posts: 282Member
    gaby_978 wrote: »
    I know but at this time I dont have access to a newer IOS

    Hi gaby,

    How much memory in that 2500 router?, if you have 16/16 send me a private, maybe i can help you. icon_thumright.gif
  • jovan88jovan88 Posts: 393Member
    shot in the dark, do you have the ip routing command entered?
    * sorry just saw you had ospf happening,

    try seeing if the oldschool IGRP works
  • Bl8ckr0uterBl8ckr0uter Posts: 5,031Inactive Imported Users
    jovan88 wrote: »
    shot in the dark, do you have the ip routing command entered?
    * sorry just saw you had ospf happening,

    try seeing if the oldschool IGRP works

    That was what I was thinking as well but if EIGRP works, IGRP will not. 11.1 should support EIGRP according to cisco.
  • gaby_978gaby_978 Posts: 222Member
    knwminus wrote: »
    It should work. EIGRP is supported by 11.X. How are you configuring EIGRP? More importantly why are you configuring eigrp? Can you use another routing protocol?

    I can use any other routing protocol. Like I mentioned OSPF works fine. I just want to use EIGRP for practice purposes.
    ‎"If you spend too much time thinking about a thing,
    you'll never get it done"
  • gaby_978gaby_978 Posts: 222Member
    elegua wrote: »
    Hi gaby,

    How much memory in that 2500 router?, if you have 16/16 send me a private, maybe i can help you. icon_thumright.gif

    Cant remember right now. Ill check tonight and let you know.
    ‎"If you spend too much time thinking about a thing,
    you'll never get it done"
  • Bl8ckr0uterBl8ckr0uter Posts: 5,031Inactive Imported Users
    gaby_978 wrote: »
    I can use any other routing protocol. Like I mentioned OSPF works fine. I just want to use EIGRP for practice purposes.

    Ok. I thought this was for something else. Well see if you can you IGRP but I highly doubt it will work?
  • phoeneousphoeneous Go ping yourself... Posts: 2,331Member ■■■■■■■□□□
    Can you post the configs of both?
  • networker050184networker050184 Posts: 11,962Mod Mod
    I think you will be limited to IGRP only with that IOS.
    An expert is a man who has made all the mistakes which can be made.
  • Bl8ckr0uterBl8ckr0uter Posts: 5,031Inactive Imported Users
    I think you will be limited to IGRP only with that IOS.

    Can you redistribute into igrp from eigrp?


    Also this leads me to believe that it should support eigrp on 11.X
    Field Alert: EIGRP and ARP Issues in Cisco IOS Software Releases 11.1 and 11.2 - Cisco Systems
  • mikej412mikej412 Posts: 10,090Member
    gaby_978 wrote: »
    System image file is "flash:igs-dr-l.111-17", booted via flash
    It's an OLD OLD OLD IP/IPX/AT/IBM support IOS that required 8Meg DRAM and 4 MEG FLASH. Sorry -- no room for EIGRP in that feature set.
    :mike: Cisco Certifications -- Collect the Entire Set!
  • gaby_978gaby_978 Posts: 222Member
    mikej412 wrote: »
    It's an OLD OLD OLD IP/IPX/AT/IBM support IOS that required 8Meg DRAM and 4 MEG FLASH. Sorry -- no room for EIGRP in that feature set.

    Damm. LOL ok ill try to get a newer IOS and try it again.
    ‎"If you spend too much time thinking about a thing,
    you'll never get it done"
Sign In or Register to comment.