Eigrp

Hey guys

I am unable to configure EIGRP between a 2600 and a 2513 series router. The 2600 takes all the EIGRP configs fine. The 2500 take all the configs while you are configuring EGIRP but once done and I run a sh run, no EIGRP configs appear. Had this issue before when i had my lab firs setup and had to run OSPF instead. Any suggestions?????

Thanks

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

gaby_978

Here is the sh ver

bbrtr3#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-DR-L), Version 11.1(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 27-Jan-98 12:41 by phester
Image text-base: 0x03030DD0, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

bbrtr3 uptime is 1 hour, 32 minutes
System restarted by power-on
System image file is "flash:igs-dr-l.111-17", booted via flash

kalebksp

That is a very old IOS, my suggestion would be to get a more recent IOS and see if it works properly.

gaby_978

I know but at this time I dont have access to a newer IOS

Bl8ckr0uter

gaby_978 wrote: »

I know but at this time I dont have access to a newer IOS

It should work. EIGRP is supported by 11.X. How are you configuring EIGRP? More importantly why are you configuring eigrp? Can you use another routing protocol?

elegua

gaby_978 wrote: »

I know but at this time I dont have access to a newer IOS

Hi gaby,

How much memory in that 2500 router?, if you have 16/16 send me a private, maybe i can help you.

jovan88

shot in the dark, do you have the ip routing command entered?
* sorry just saw you had ospf happening,

try seeing if the oldschool IGRP works

Bl8ckr0uter

jovan88 wrote: »

shot in the dark, do you have the ip routing command entered?
* sorry just saw you had ospf happening,

try seeing if the oldschool IGRP works

That was what I was thinking as well but if EIGRP works, IGRP will not. 11.1 should support EIGRP according to cisco.

gaby_978

knwminus wrote: »

It should work. EIGRP is supported by 11.X. How are you configuring EIGRP? More importantly why are you configuring eigrp? Can you use another routing protocol?

I can use any other routing protocol. Like I mentioned OSPF works fine. I just want to use EIGRP for practice purposes.

gaby_978

elegua wrote: »

Hi gaby,

How much memory in that 2500 router?, if you have 16/16 send me a private, maybe i can help you.

Cant remember right now. Ill check tonight and let you know.

Bl8ckr0uter

gaby_978 wrote: »

I can use any other routing protocol. Like I mentioned OSPF works fine. I just want to use EIGRP for practice purposes.

Ok. I thought this was for something else. Well see if you can you IGRP but I highly doubt it will work?

networker050184

I think you will be limited to IGRP only with that IOS.

Bl8ckr0uter

networker050184 wrote: »

I think you will be limited to IGRP only with that IOS.

Can you redistribute into igrp from eigrp?

Also this leads me to believe that it should support eigrp on 11.X
Field Alert: EIGRP and ARP Issues in Cisco IOS Software Releases 11.1 and 11.2 - Cisco Systems

mikej412

gaby_978 wrote: »

System image file is "flash:igs-dr-l.111-17", booted via flash

It's an OLD OLD OLD IP/IPX/AT/IBM support IOS that required 8Meg DRAM and 4 MEG FLASH. Sorry -- no room for EIGRP in that feature set.

gaby_978

mikej412 wrote: »

It's an OLD OLD OLD IP/IPX/AT/IBM support IOS that required 8Meg DRAM and 4 MEG FLASH. Sorry -- no room for EIGRP in that feature set.

Damm. LOL ok ill try to get a newer IOS and try it again.