Video Conference over Call Manager Express
sacredboy
Member Posts: 303 ■■■□□□□□□□
Hi guys. Just want to ask if it's possible to implement video over Call Manager Express to support video conference on 9XXX series IP Phones.
Thank you.
Thank you.
Best, sacredboy!
Comments
-
davenull
Member Posts: 173 ■■■□□□□□□□
Not sure if possible, but be aware of this: Feature Deprecation Announcement for Video Conferencing and Transcoding Using PVDM3 on ISR G2 Product Bulletin - Cisco
Edit: it's kind of sad that the feature "was never fully productized or supported", but still made it into CCIE Collab exam. -
sacredboy
Member Posts: 303 ■■■□□□□□□□
davenull, thank you for reply. I'll try to figure it out and write in this thread.Best, sacredboy!
-
sacredboy
Member Posts: 303 ■■■□□□□□□□
"We dropped support for using PVDM3 as a video CFB, you'll need a video CFB for that.". Is it the same? And what is CFB?Not sure if possible, but be aware of this: Feature Deprecation Announcement for Video Conferencing and Transcoding Using PVDM3 on ISR G2 Product Bulletin - Cisco
Edit: it's kind of sad that the feature "was never fully productized or supported", but still made it into CCIE Collab exam.Best, sacredboy! -
davenull
Member Posts: 173 ■■■□□□□□□□
Yes, they are talking about the same thing.
CFB stands for Conference Bridge. Cisco wants you to use TelePresence Servers (TS) as CFB along with TelePresence Conductor (TC), and possibly TelePresence Management Suite (TMS). You could still use the older Multipoint Control Units (MCU) as CFB too.
In short, TS and MCU are the video CFB they are talking about. They are the workhorses that process video. TelePresence Conductor manages CFB resources and talks to CUCM. TMS is used for scheduling conferences.
You could also look into cloud-based conferencing, like Cloud CMR.
Also, some TelePresence endpoints support MultiSite, which means they can host a video conference, but the number of participants is limited and you need a special license to enable MultiSite. -
sacredboy
Member Posts: 303 ■■■□□□□□□□
So, the only way to "play" with video calls in my home lab is to deploy CUCM. Right?Best, sacredboy!
-
davenull
Member Posts: 173 ■■■□□□□□□□
As far as I understand it, you should still be able to make point-to-point video calls with CME as long as they don't require transcoding. It's the DSP-based video conferencing that is getting deprecated.
