sam88 wrote: » Thanks for sharing the information. I'm using this for my home lab.Last night I tried to upload the ios (c3750-ipbasek9-mz.150-2.SE11.bin)through xmodem (hyperterminal). Which took almost 7-8 hours and later I got an error insufficient space. Now, I'll try to upload another IOS (c3750-ipservicesk9-mz.122-55.SE12.bin) because he will take 10-15 business days for the replacement.
sam88 wrote: » Hi Clarson, I need a suggestion from you. I am planning to purchase 1 NME-CUE for my 2821 router (128 mb flash & 1024 Mb ram) with PVDM2-16. 2821 router has 8.x CME version installed. 2 x 2811 with (128 mb flash and 512 mb ram) & 1 x 2811 with (256 mb Flash & 512 mb ram with PVDM2-16 c2800nm-adventerprisek9_ivs-mz.151-4.M4.bin) all the 3 routers has latest ios installed c2800nm-adventerprisek9-mz.151-4.M4.bin. Product Description Cisco NME-CUE Unity Express module with 120 GB HDD & 512 MB RAM (150 Voicemail License) CPU Model: Intel(R) Celeron(R) M processor 1.00 GHZ CPU Cache(Kbyte):512 Installed License -voicemail_lic.sig: 150 MAILBOX LICENSE -ivr_lic.sig: NULL IVR LICENSE -port_lic.sig: 8 PORT BASE LICENSE -version 7.x
sam88 wrote: » March 15,2018 I'm going to join my ccna R+S class before that I want to be ready with all the equipment's. Pretty new to the networking field. I bought these books Todd Lamle and ccna voice Jeremy. My friend told me it's very important to see the physical equipment's to get the better understanding about hardware and for hands on experience. I Checked online some blogs and forums and I bought the below mentioned hardware for myself. I'm struggling for the missing modules and hardware for my home lab. If you can guide me with the missing hardware and modules. I'll really appreciate your help and support regarding the same. Atleast for the ccnp or ccvp level hardware home lab. Any suggestion regarding books or study material. Router's ********** 1- 2821 (256 mb CF 1024 mb Ram) Ios:- c2800nm-adventerprisek9-mz.151-4.M12a.bin PVDM2-16 Vwic-2mft T1/E1 Wic-2T 2- 2811 (256 mb CF and 512 Mb Ram) Ios:- c2800nm-adventerprisek9-mz.151-4.M12a.bin PVDM2-16 Vwic-2mft T1/E1 Wic-2T 3- 2811 (128 mb CF and 512 mb ram) Ios:- c2800nm-adventerprisek9_ivs-mz.151-4.M12a.bin Vwic2-1MFT 4- 2811 (128 mb CF and 512mb ram) Ios:-c2800nm-adventerprisek9-mz.151-4.M12a.bin 5- 1760 1 FE (96/32) 1- 1760 [1FE] [96/32] (IOS- c1700-entbasek9-mz.124-25a.bin ) Cisco 1760 (MPC860P) processor (revision 0x400) with 85627K/12677K bytes of memory. Processor board ID FOC07271KE2 (2250070842), with hardware revision 0000 MPC860P processor: part number 5, mask 2 1 FastEthernet interface 1 ISDN Basic Rate interface 32K bytes of NVRAM. 32768K bytes of processor board System flash (Read/Write) 6- 2620XM [1FE] [64/16 CF] (IOS- c2600-d-mz.122-13c.bin) cisco 2620XM (MPC860P) processor (revision 0x100) with 61440K/4096K bytes of memory. Processor board ID M860 processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 2 Serial(sync/async) network interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) 7- 2620XM [1FE] [96/16 CF] (IOS- c2600-d-mz.122-29a.bin) cisco 2620XM (MPC860P) processor (revision 0x100) with 94208K/4096K bytes of memory. Processor board ID M860 processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 FastEthernet/IEEE 802.3 interface(s) 2 Serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) 8- 1841 [2FE] [256 RAM /64 CF] (IOS- c2800nm-adventerprisek9-mz.151-4.M12a.bin) Cisco 1841 with 239616K/22528K bytes of memory. Processor board ID 2 FastEthernet interfaces 2 Channelized (E1 or T1)/PRI ports 1 Virtual Private Network (VPN) Module DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write) (IOS- c1841-adventerprisek9-mz.151-4.M12a.bin) 9- 1841 [2FE] [256 RAM/64 CF] (IOS- c1841-adventerprisek9-mz.151-4.M12a.bin) Cisco 1841 with 237568K/24576K bytes of memory. Processor board ID 2 FastEthernet interfaces 2 Virtual Private Network (VPN) Modules DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write) ************************************* Switches I have 3 2950-24PS 3 x 2950-24PS (IOS- c2950-i6q4l2-mz.121-19.EA1c.bin ) cisco WS-C2950T-24 (RC32300) processor (revision P0) with 20808K bytes of memory. Processor board ID Last reset from system-reset Running Enhanced Image 24 FastEthernet/IEEE 802.3 interface(s) 2 Gigabit Ethernet/IEEE 802.3 interface(s) I have 2 3550-24PS (Non-Poe) 2 x 3550-24PT [NON-PoE] (IOS- c3550-i9q3l2-mz.121-22.EA7/c3550-i9q3l2-mz.121-22.EA7.bin) 1 3750 that needs to be replaced with 3750 V2 (PoE) Ip Phones(SCCP) ************** Stuck in boot Loop (power cube used) 1- 7942 2- 7942 3- 7942 Modules ******* 6- 1 ISDN Basic Rate interface 7- 1 ISDN Basic Rate interface 1760- Using 2 xPVDM-256K4 but the led is not up. Quite sure it's not using my both PVDM. LAPTOP ******* 1-DELL INSPIRON WIN7-64bit I3-3217U 1.80GHz > VMware Workstation 14 Player [Winserver 2012 R2 (Data centre) CUCM 9.x installed] & TMS 15.x installed.
sam88 wrote: » Thanks for your reply. I'll not purchase hardware anymore. I believe this lab can't be used for ccna-voice/collaboration as well. Do you have any link to look for ccna-collaboration hardware?
sam88 wrote: » Thanks.I have to purchase 2900 series router with PVDM3. I don't have EX60 & 90 but I do have DX70 & DX80. Hope I can use them soon. Thanks for your help and co-operation.
sam88 wrote: » Thanks again.
