minimum ios for routers on ccna

rotinhell2568

what is the minimum ios i need on a 2501 so i can learn basic stuff for ccna?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

kalebksp

I think you need to qualify what you mean by basic. You could use 11.2 and learn basic stuff. You'll probably want a 12.3 IP Plus IOS, as it's the most current, it also depends on how much Flash and DRAM your router has.

rotinhell2568

i know it needs to have 16/16 but is 12.1 enough to do most of the stuff needed to do on the ccna level and maybe some ccnp level

rotinhell2568

anyone?

drew2000

I've heard that 12.x is new enough for CCENT/NA, but I've not taken the test yet myself.

Drew

Slowhand

From my understanding, version 12.3 of the IOS should serve you well for most things you'll see on the CCNA (640-802) exam, or the corresponding ICND1 and ICND2 exams. In reality, you'll want to run 12.4, especially when working towards the CCNP exams, as the newer features will be tested on. I may be corrected by one of the higher-up Cisco gurus on the specifics, but that's going to be your safest bet: version 12.3 or higher.

rotinhell2568

i can get two 2501 routers with ios 12.2 and two transceivers for 15 a piece. Is this a good deal?

dynamik

rotinhell2568 wrote: »

i can get two 2501 routers with ios 12.2 and two transceivers for 15 a piece. Is this a good deal?

That's typical. What's the memory? I wouldn't get them unless they were maxed.

rotinhell2568

max memory

Slowhand

dynamik wrote: »

That's typical. What's the memory? I wouldn't get them unless they were maxed.

You can tell that dynamik plays D&D, (or is secretly Red Mage.) He's all about the min/max action.

jbaello

I believe I'm using 12.1 and I don't recommend it, it's a very old IOS back from 1998 or so, does't even have SSH for VTY.

mgeorge

c2500-is-l.123-26.bin and c2500-is-l.122-15.T17.bin will be the only two images you really need to use.

You can easily find these images with google

rotinhell2568

does anybody know where i can find a guide on how to update the IOS?

mikej412

Software Installation and Upgrade Procedure for the 1600, 2000, 2500, 3000, AS5100, and AS5200

And this Cisco Software Upgrade Procedure document covers the 1000 1400 1600-R 1700 2600 2800 3600 3700 3800 4000 4700 AS5300 and MC3810 Series Routers.

rotinhell2568

mgeorge what are those two images for? Are they the IOS? If so which one? What's the latest ios i can run on a 16/16 2500 series router and where can i download it?

rotinhell2568

if i get a cisco 1720 router what is the minimum amount of ram and flash i'll need to run ios 12.4

kalebksp

This has been posted many times: http://cisco.com/go/fn
It will tell you what IOS any and every router or switch can run and how much memory they need to run it. I usually click "Search by Platform", select the router I want information about and click "Continue", then click "Show All Software". Ta da!

mgeorge

rotinhell2568 wrote: »

mgeorge what are those two images for? Are they the IOS? If so which one? What's the latest ios i can run on a 16/16 2500 series router and where can i download it?

12.3(26) is the LAST image released for the 2500.

both of those images are ip plus. the 12.2(15)T17 IP Plus contains IPv6, OSPFv3 and RIPng.

boostinbadger

What would the minimum feature set need to be to run the topology suggested by "The Bryant Advantage?"

pictured here: http://www.thebryantadvantage.com/images/Fast%20Track%20Topology.jpg

I am using three 1760s for routers and a 2612 for the Frame Switch. All of these are running the minimum flash and RAM.

boostinbadger

ipbasek9 would be sufficient wouldn't it?

kalebksp

Most any IOS will run that topology, you should be more concerned with what protocols are going to be used in the labs. Once you know the protocols, you can find out whether your IOS will run them using the Cisco Feature Navigator (http://cisco.com/go/fn).

rotinhell2568

what do you guys think about the cisco 2524 router. I can get one for 20 bucks with 16/16. Will i have to buy a wic-1t card to use serial? If it does is it still worth it to buy. I can get a wic-1t card for 25 bucks with free shipping

kalebksp

2524s support only a few WIC cards, and $20 for the router plus $25 for a WIC card is way too much to be spending on a 2500 series (ignoring the access servers and frame switches). For $55 you should be able to find a 2600 series.

rotinhell2568

if a get a router with 8mb of flash could i buy another 8mb stick and put it in to make a total of 16mb or is their only one slot for flash

rotinhell2568

what do you guys think about this

Cisco 1700 Series 1721 Router w WIC-1T, Power, Cable - eBay (item 350150466350 end time Jan-10-09 14:40:01 PST)

boostinbadger

They are decent lab routers. We used them in the Cisco Network Academy. I have three right here in front of me.

rotinhell2568

is 47 bucks a good deal for one that comes with a wic-1t. Also the guy doesn't know how much memory it has. What is the minimum memory that they come with?

rotinhell2568

do you guys think that that one is a good deal. He says he doesn't know anything about how much ram or flash or what ios it has

mikej412

If it has 64/32 then it's a deal. But you'd have to price memory and flash upgrades and consider that possible added cost, since it probably isn't maxed out on memory. Would that cost still be less than the other current 1721s with 64/32 available for $33 ($19 + $14 shipping to my zip) plus the cost of a WIC-1T (including the shipping)? The cheapest Buy-it-Now WICs are just under $28 each (with shipping).

You'd have to do the math and ask yourself if you feel lucky.

Slowhand

The 1721 routers are an excellent choice, especially if you're planning on building a lab to study for CCNP, (and beyond). They officially run version 12.3 of the IOS, but can support a specialized, non-production version of 12.4, so they do run the latest version and are excellent for playing around with the newer features. Just make sure that the one(s) you buy come with the proper cards, or you'll have to buy those seperately.

rotinhell2568

i just bought two cisco 2501 routers with two transceivers off of ebay. I now have two routers and 1 switch. I know i will have to upgrade the ram on the routers but i can worry about that a little later. Do you guys know what else i will need to buy to get a solid foundaition for working with cisco equipment for the CCNA?