Keyboard problems with terminal emulator...

hi guys... hooked up my modest lab last night and im using tera term and secure crt to connect. problem is, when i type commands, the keys seems to type whatever they want some of the time. i know there was a setting for this, but i cant remember what... anyone know what im talkin about? i have it set as vt100 right now.

hopefully CCNA by years end! i sure like this stuff better than the MS, but unfortunately i think thats what will be getting me my next job.

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

tdean

uh oh, did i screw up explaining this or is it a ridiculously easy question i should know myself.

Kaminsky

Look at what your serial connection is set at on Tera Term.

Should be:
Speed: 9600
Data: 8 bits
Stop bits: 1
Parity: None
Flow Control: XON/XOFF

VT100 should be fine.

and you should see normal text.

tdean

thats what its set at. heres what comes up when i try to type show conf

Access_Server>sh/w confM
Access_Server>sh/w confMen
^
% Invalid input detected at '^' marker.
Access_Server>show rulling confhg
^
% Invalid input detected at '^' marker.
Access_Server>s(ow
% Unknown command or computer name, or unable to find computer address
Access_Server>
Access_Server>r5n
Access_Server>r5n
Access_Server>chow
Access_Server>chow
Access_Server>chow
Translating "chow"
% Unknown command or computer name, or unable to find computer address
Access_Server>show config
^
% Invalid input detected at '^' marker.
Access_Server>en
Access_Server#s(ow confeg
Access_Server#s(ow confeg
^
% Invalid input detected at '^' marker.
Access_Server#qhow config
^
% Invalid input detected at '^' marker.
Access_Server#qh

Kaminsky

that w6n't be y64r ter05na3 sett5ngs then. Y64 w643d 14st get e5th ... ahhhh think I sussed it....

That should have read
That won't be your terminal settings then. You would get either nothing or gibberish.

I am on a laptop and you can ctrl-alt fn and many keys do odd things like in the first line of this post. Wonder if you're keyboard is doing something similar.

Check it out in notepad and see what happens. OR use Putty

veritas_libertas

Kaminsky wrote: »

OR use Putty

+1 for Putty.

tdean

same thing with putty. i wonder if its a driver issue. i am on win7 x64 and i am using a usb to serial connector with the vista driver. maybe i'll set up a virtual xp machine on here and see how that goes.

tdean

ok, this is ridiculous now. i set up a vm with xp pro and i tried putty, tera term and secure crt and im still having the same problems. i did notice this when the ios loads though...

Illegal IP keyword - mroute-cache
Illegal IP keyword - classless
Loading c2500-d-l_113-1.bin at 0x3000040, size = 5930560 bytes [OK]

does anyone have any ideas?

tdean

is there another way to connect to a router other than serial/usb? i have a cross over cable, can i connect that to the console port and an unused nic?

this is terrible.

captobvious

Maybe this will help you - Cabling Guide for Console and AUX Ports

Good luck!

tdean

thank you, i will check it out. i just hooked everything up to my computer in my room and it works perfectly. apparently the issue is this computer im on now. great.

veritas_libertas

Terminal is always confusing to those that have never experienced it before. I was big on TNCs back when I spent more time on Packet and A.P.R.S. Some day I will be more involved in Amateur Radio again.

Once you learn how to use it once you will have it down. It is down right frustrating at times.

tdean

ugh... thats the truth. this machine is x64, although the vm i set up was as x86, the underlying hardware was not. my machine upstairs is x86 and it works fine. im returning the usb to serial cable and getting something that is proven on win7 x64. thanks for the replies...